2008-271 - Laserfiche WebLink

Home Browse Search

IRC Work Order #7 County Road 512 Ph. 3 — FINAL RNV monumentation September 9th, 2008 Page 2 of 9 5. Set Permanent Reference Monuments along the Right of Way at all changes in direction, including all Points of Curvature and Tangency. Provide State Plane Coordinate values on all monumentation set. PRM's shall be an iron rod and disk stamped as agreed and encased in a 4" by 4" concrete monument and shall be placed at a maximum of 1000 feet apart. 6. Set Permanent Reference Monuments along related project properties as applicable. PRM's shall be an iron rod and disk stamped as agreed and encased in a 4" by 4" concrete monument and shall be placed at a maximum of 1000 feet apart. 7. Monument all Permanent Control Points (PCP's) along the baseline at all changes in direction, including all Points of Curvature and Tangency. Provide State Plane Coordinate values on all baseline control points. PCP's shall be a Parker Kaylon nail and tab stamped as agreed and shall be placed at a maximum of 1000 feet apart. 8. Examine and review updated title report for twenty seven adjacent properties as necessary. Include revisions on final map as necessary. Revise and update existing Right of Way Map to depict all set or found monumentation and current title work as applicable. Map shall adhere to attached Right of Way Map checklist (Exhibit "B"). Provide copies for review and comment. Address comments and prepare mylars as required. SECTION III — TIME FOR COMPLETION & DELIVERABLESIWORK PRODUCT 1. Project shall be completed as follows: a. Time of 80% - 90% PRELIMINARY review submittal shall be 60 calendar Days from notice to proceed. b. Time of FINAL project completion shall within 30 calendar days of receipt of the County's review comments. 2. Deliverables -The SURVEYOR shall provide the COUNTY: a. PRELIMINARY REVIEW. 80% - 90% product for County review and comments. One (1) paper "hardcopy". County shall strive to provide review comments within 30 calendar days of preliminary submittal. b. FINAL one (2) paper "hardcopy" signed and sealed sets and one (1) signed and sealed MYLAR sets in adequate recording fashion (I.E. Borders). Sheeted and model space (as applicable) AutoCad drawing file and PDF formats on CD. c. Survey set/sheets shall include a cover sheet with location sketch, survey certifications, and related title and project No; a survey notes/legend/abbreviation sheet, survey horizontal control sheet(s), right-of-way plan view sheets and/or as indicated in the County supplied Right -of -Way map "checklist". d. Work Product and digital versions are to prepared and submitted so that the COUNTY or other consultants can readily use it for the design and analysis of the area, as defined. It shall contain all information necessary for third -party surveyor to independently recreate and/or utilize the survey work. It is acknowledged all final products become property of Indian River COUNTY and will be available for use by the public at large. a. The SURVEYOR'S work product shall meet or exceed the minimum standards as defined by Sections II, III and IV or the COUNTY will not approve the SURVEYOR'S request for payment.