2004-103 - Laserfiche WebLink

Home Browse Search

' 1 . 5 CONTRACTOR' S RESPONSIBILITIES FOR SUBMITTAL OF SHOP DRAWINGS , PRODUCT DATA AND SAMPLES ' A . The CONTRACTOR ' s responsibilities for submittal of shop drawings , product data , and samples are set forth in paragraph 6 . 17 of the General ' Conditions and as further explained herein . B . Prior to submission , thoroughly check shop drawings , product data , and ' samples for completeness and for compliance with the Contract Documents , verify all dimensions and field conditions , and coordinate the shop drawings with the requirements for other related work . Also review ' each shop drawing before submitting it to the ENGINEER to determine that it is acceptable in terms of the means , methods , techniques , ' sequences and operations of construction , safety precautions and programs incidental thereto , all of which are the CONTRACTOR' s responsibility. ' 1 . It is CONTRACTOR' S responsibility to review submittals made by his suppliers and Subcontractors before transmitting them to ENGINEER to assure proper coordination of the Work and to ' determine that each submittal is in accordance with its desires and that there is sufficient information about materials and equipment for ENGINEER to determine compliance with the Contract Documents . 2 . Incomplete or inadequate submittals will be returned for revision without review . ' C . The CONTRACTOR's responsibility for errors and omissions in submittals is not relieved by the ENGINEER's review of submittals . The ' CONTRACTOR shall approve the shop drawings based on his in -the-field measurements , prior to submittal to the ENGINEER for his review . ' D . Notify the ENGINEER , in writing at the time of submission , of deviations in submittals from the requirements of the Contract Documents . The CONTRACTOR's responsibility for deviations in submittals from the ' requirements of the Contract Documents is not relieved by the ENGINEER' s review of submittals , unless the ENGINEER gives written acceptance of specific deviations . E . Begin no work , which requires submittals until return of submittals with the ENGINEER's stamp and initials or signature indicating the submittal has ' been reviewed . Last revised 7/ 17/01 01340-2 PROJECT ' F:\Public Works\Capital Projects\Fourth Street-Old Dixie-US I \CONTRACT DOCUMENTS\01340 Submittal of Shop Drawings .doc