Laserfiche WebLink
1 .4 QUALITY ASSURANCE <br /> A. MPI Standards : <br /> 1 , Products : Complying with MPI standards indicated and listed in "MPI Approved Products List. " <br /> 2 . Preparation and Workmanship : Comply with requirements in "MPI Architectural Painting <br /> Specification Manual" for products and paint systems indicated. <br /> B . Mockups : Apply benchmark samples of each paint system indicated and each color and finish selected to <br /> verify preliminary selections made under sample submittals and to demonstrate aesthetic effects and set <br /> quality standards for materials and execution. <br /> 1 . Architect will select one surface to represent surfaces and conditions for application of each paint <br /> system specified in Part 3 . <br /> a. Vertical and Horizontal Surfaces : Provide samples of at least 100 sq. ft. (9 sq. m) . <br /> b . Other Items : Architect will designate items or areas required. <br /> 2 . Final approval of color selections will be based on benchmark samples. <br /> a. If preliminary color selections are not approved, apply additional benchmark samples of <br /> additional colors selected by Architect at no added cost to Owner. <br /> 1 . 5 DELIVERY, STORAGE, AND HANDLING <br /> A. Store materials not in use in tightly covered containers in well-ventilated areas with ambient temperatures <br /> continuously maintained at not less than 45 deg F (7 deg C) . <br /> 1 . Maintain containers in clean condition, free of foreign materials and residue . <br /> 2 . Remove rags and waste from storage areas daily. <br /> 1 .6 PROJECT CONDITIONS <br /> A. Apply paints only when temperature of surfaces to be painted and ambient air temperatures are between <br /> 50 and 95 deg F ( 10 and 35 deg C) . <br /> B . Do not apply paints in snow, rain, fog, or mist; when relative humidity exceeds 85 <br /> percent; at <br /> temperatures less than 5 deg F (3 deg C) above the dew point; or to damp or wet surfaces. <br /> 1 .7 EXTRA MATERIALS <br /> A. Furnish extra materials described below that are from same production run (batch mix) as materials <br /> applied and that are packaged for storage and identified with labels describing contents. I J <br /> 1 . Quantity: Furnish an additional 5 percent, but not less than 1 gal. (3 . 8 L) of each material and <br /> color applied. <br /> Wabasso Beach Park Revised 01/08/08 <br /> Indian River County 09911 - 2 <br /> DAA Project No . 6008 <br />