Laserfiche WebLink
B . Mockups : Apply benchmark samples of each coating system indicated to verify preliminary selections <br /> made under sample submittals and to demonstrate aesthetic effects and set quality standards for materials <br /> and execution. <br /> 1 . Architect will select one surface to represent surfaces and conditions for application of each type <br /> of coating and substrate . <br /> a. Wall and Ceiling Surfaces : Provide samples of at least 100 sq. ft. (9 sq. m) . <br /> b . Other Items : Architect will designate items or areas required. <br /> 2 . Apply benchmark samples after permanent lighting and other environmental services have been <br /> activated. <br /> 3 . Final approval of color selections will be based on benchmark samples . <br /> a. If preliminary color selections are not approved, apply additional benchmark samples of <br /> additional colors selected by Architect at no added cost to Owner. <br /> 1 . 5 DELIVERY, STORAGE, AND HANDLING <br /> A. Store materials not in use in tightly covered containers in well-ventilated areas with ambient temperatures <br /> continuously maintained at not less than 45 deg F (7 deg C) . <br /> 1 . Maintain containers in clean condition, free of foreign materials and residue . <br /> 2 . Remove rags and waste from storage areas daily. <br /> 1 . 6 PROJECT CONDITIONS <br /> A. Apply coatings only when temperature of surfaces to be coated and surrounding air temperatures are <br /> between 50 and 95 deg F ( 10 and 35 deg Q . <br /> B . Do not apply coatings in snow, rain, fog, or mist; when relative humidity exceeds 85 percent; <br /> at <br /> temperatures less than 5 deg F (3 deg C) above the dew point; or to damp or wet surfaces . <br /> 1 .7 <br /> EXTRA MATERIALS <br /> A. Furnish extra materials described below that are from same production run (batch mix) as materials <br /> applied and that are packaged for storage and identified with labels describing contents. <br /> 1 . Quantity: Furnish an additional 5 percent, but not less than 1 gal. (3 . 8 L) of each material and <br /> color applied. <br /> PART2 - PRODUCTS <br /> 2 . 1 HIGH-PERFORMANCE COATINGS, GENERAL <br /> A. Material Compatibility: <br /> 1 . Provide materials for use within each coating system that are compatible with one another and <br /> substrates indicated, under conditions of service and application as demonstrated by manufacturer, <br /> based on testing and field experience . <br /> Wabasso Beach Park Revised 01/08/08 <br /> Indian River County 09960 - 2 <br /> DAA Project No . 6008 <br />