Laserfiche WebLink
3. Examine substrate conditions for compliance with requirements, including flatness and attachment <br />to structural members. <br />4. Review special roof details, roof drainage, roof penetrations, equipment curbs, and condition of <br />other construction that will affect sheet metal flashing. <br />5. Document proceedings, including corrective measures and actions required, and furnish copy of <br />record to each participant. <br />1.6 DELIVERY, STORAGE, AND HANDLING <br />A. Do not store'sheet metal flashing and trim materials in contact with other materials that might cause <br />staining, denting, or other surface damage. Store sheet metal flashing and trim materials away from <br />uncured concrete and masonry. <br />B. Protect strippable protective covering on sheet metal flashing and trim from exposure to sunlight and high <br />humidity, except to the extent necessary for the period of sheet metal flashing and trim installation. <br />PART2-PRODUCTS <br />2.1 SHEET METALS <br />A. General: Protect mechanical and other finishes on exposed surfaces from damage by applying a <br />strippable, temporary protective film before shipping. <br />B. Zinc -Tin Alloy -Coated Stainless -Steel Sheet: ASTM A 240/A 240M, Type 304, dead -soft, fully <br />annealed stainless-steel sheet of minimum uncoated thickness indicated; coated on both sides with a zinc - <br />tin alloy (50 percent zinc, 50 percent tin), with factory -applied gray preweathering. <br />2.2 UNDERLAYMENT MATERIALS <br />A. Self -Adhering, High -Temperature Sheet: Minimum 30 to 40 mils (0.76 to 1.0 mm) thick, consisting of <br />slip -resisting polyethylene -film top surface laminated to layer of butyl or SBS -modified asphalt adhesive, <br />with release -paper backing; cold applied. Provide primer when recommended by underlayment <br />manufacturer. <br />1. Thermal Stability: ASTM D 1970; stable after testing at 240 deg F (116 deg Q. <br />2, Low -Temperature Flexibility: ASTM D 1970; passes after testing at minus 20 deg F (29 deg Q. <br />3. Products: Subject to compliance with requirements, available products that may be incorporated <br />into the Work include, but are not limited to, the following: <br />a. Carlisle Coatings & Waterproofing Inc.; CCW WIP 300HT. <br />b. Grace Construction Products, a unit of W. R. Grace & Co.; Ultra. <br />C, Owens Corning; WeatherLock Metal High Temperature Underlayment, <br />B. Slip Sheet: Building paper, 3-1/100 sq. ft. (0.16-kg/sq. m) minimum, rosin sized. <br />Wabasso Beach Park <br />Indian River County <br />DAA Project No. 6008 <br />07620-3 <br />