Laserfiche WebLink
2 . Grout: Furnish quantity of grout equal to 3 percent of amount installed for each <br /> type, <br /> composition, and color indicated. <br /> PART2 - PRODUCTS <br /> 2 . 1 PRODUCTS, GENERAL <br /> A. ANSI Ceramic Tile Standard: Provide tile that complies with ANSI A137 . 1 for types, compositions, and <br /> other characteristics indicated. <br /> 1 . Provide file complying with Standard grade requirements unless otherwise indicated. <br /> B . ANSI Standards for Tile Installation Materials : Provide materials complying with ANSI A108 .02, ANSI <br /> standards referenced in other Part 2 articles, ANSI standards referenced by TCA installation methods <br /> specified in file installation schedules, and other requirements specified. <br /> C. Factory Blending: For file exhibiting color variations within ranges, blend tile in factory and package so <br /> tile units taken from one package show same range in colors as those taken from other packages and <br /> match approved Samples. <br /> D . Mounting: For factory-mounted rile, provide back- or edge-mounted file assemblies as standard with <br /> manufacturer unless otherwise indicated. <br /> 1 . Where rile is indicated for installation [in swimming pools] [on exteriors] [or] [in wet areas] , do <br /> not use back- or edge-mounted file assemblies unless file manufacturer specifies in writing that <br /> this type of mounting is suitable for installation indicated and has a record of successful in-service <br /> performance . <br /> E . Factory-Applied Temporary Protective Coating : Where indicated under file type, protect exposed <br /> surfaces of tile against adherence of mortar and grout by precoating with continuous film of petroleum <br /> paraffin wax, applied hot. Do not coat unexposed tile surfaces. <br /> 2 .2 TILE PRODUCTS <br /> A. Tile Type : Glazed wall tile] . <br /> 1 . Manufacturers : Subject to compliance with requirements, available manufacturers offering <br /> products that may be incorporated into the Work include, but are not limited to, the following : <br /> a. American Olean; Division of Dal-Tile International Inc . <br /> b . Daltile ; Division of Dal-Tile International Inc . <br /> C, Florida Tile Industries, Inc . <br /> 2 . Module Size : 4- 1 /4 by 4- 1 /4 inches ( 108 by 108 mm) . <br /> 3 . Thickness : 5/ 16 inch (8 mm) . <br /> 4 . Face : Plain with modified square edges or cushion edges . <br /> 5 . Finish: Gloss glaze. <br /> 6 . Tile Color and Pattern: As selected by Architect from manufacturer's full range . <br /> 7 . Grout Color: As selected by Architect from manufacturer's full range. <br /> Wabasso Beach Park Revised 01/08/08 <br /> Indian River County 09310 - 3 <br /> DAA Project No. 6008 <br />