Laserfiche WebLink
41 1 <br /> asphalt concrete mix or concrete pavement mix so as to restore the roadway to the satisfaction of <br /> the Engineer. <br /> When removing non-intrusive detectors that are not embedded in or under <br /> pavement, remove the roadside detector assembly, cabling, mounting hardware, and detector <br /> electronics in cabinet. <br /> (b) Pedestrian Detector Assemblies : Include in the removal of pedestrian detector <br /> assemblies the removal of the push button detector, sign, and all mounting hardware , including <br /> the supporting post and foundation . <br /> 6904 .6 Removal of Mast Arms and Span Wires : Disconnect the mast arms and span <br /> wires carefully at the pole , and salvage all usable hardware and attachment devices as <br /> determined by the Engineer. Remove all devices supported by the mast arm or span wire <br /> (including wiring) prior to the removal of the mast arm or span wire . <br /> For integrally installed mast arms and mast arm poles , remove the pole and mast <br /> arm combination as a unit after removing the devices supported by the mast arms . <br /> 6904 . 7 Removal of Cabling and Conduit : After removing the conductor cable and <br /> conduit, carefully stub , or protect with other appropriate procedures, the remaining conductor <br /> cable and conduit at the point of removal . <br /> If the removal of any cables and conduit requires excavation , restore disturbed <br /> areas compatible with adjacent ground areas . <br /> 690-5 Transporting and Storing Removed Equipment. <br /> When the Contract Documents specify special handling, deliver equipment and materials <br /> that are not stipulated to be reused in the new installations to the location( s) designated in the <br /> Contract. When the Contract Documents note no special handling, stockpile or dispose of the <br /> removed materials as approved by the Engineer. The Engineer will determine ownership of <br /> removed equipment and will approve of the removal of any salvaged equipment from the project <br /> in advance . <br /> Provide disposal areas , and dispose of removed concrete strain 1 <br /> p p poles in such areas . <br /> p <br /> 690-6 Method of Measurement. <br /> 690-6 . 1 General : The quantities to be paid for will be measured in accordance with the <br /> different work tasks required in this Section . The Contract unit price for each different work task <br /> as specified in the Contract Documents will include all labor and equipment required to remove <br /> f the specified items specified by the Pay Item Numbers . <br /> 690-6 .2 Remove Poles : <br /> 690-6.2 . 1 Pole Removal Shallow : The quantity to be paid for will be the removal <br /> of each pole including the foundation and all accessories or attachments to a depth not less than <br /> 4 feet below existing grade . <br /> 690-6 .2 . 2 Pole Removal Deep : The quantity to be paid for will be the complete <br /> removal of the pole and foundation including all accessories or attachments . <br /> 690- 6 .3 Remove Signal Pedestal : The quantity to be paid for will be the complete <br /> removal of each pedestal including the foundation and all accessories or attachments . <br /> 690-7 Basis of Payment. <br /> Prices and payments will be full compensation for all work specified in this Section . <br /> Payment will be made under : <br /> Item No . 690- 10- Remove Traffic Signal Head Assembly - each . <br /> . 1 82 - <br /> FPID ( S ) : 423186 - 1 - 58 - 01 <br />