2011-031 - Laserfiche WebLink

Home Browse Search

I • Identify and document fire alarm and sprinkler system interfaces that will need to be connected to the new system, as follows : Electronically released door locks Magnetic door hold-open circuits Elevator recall Elevator shunt trip (if provided) Duct smoke detection HVAC fan controls Fire and/or smoke detectors Smoke control system * Emergency generator status (if applicable) Sprinkler system tamper switches Sprinkler system waterflow switches * This proposal assumes the smoke control system is operational and the fire alarm system will only duplicate the present sequence of operations and replace old interface modules/relays with new. Engineer accepts no responsibility for the functionality of the system or for any variations of the sequence of operations from those provided in the original specification, as provided to Engineer . • Identify locations for new fire alarm system panel , riser, devices , appliances and related equipment . • Prepare design drawings and specifications for the installation of the new addressable fire alarm system in accordance with NFPA 72 and the Florida Fire Prevention Code . • Prepare the following specification sections : A . Section 01731 : Cutting and Patching B . Section 13 85 1 : Automatic Fire Alarm and Emergency Voice Communication System • Participate in one design review meeting with the Fire Marshall to review the proposed design . Task 2 Bidding($ 3 , 200) • Participate in one ( 1 ) pre-bid meeting and walk-through of the facility with prospective bidders . • Respond to Requests for Information from prospective bidders during the bid phase . • Review bids and assist the County in procuring a successful contractor . Task 3 Construction Administration ($ 7 , 590) • Provide two reviews of the contractor ' s submittal package . Prepare review comments . • Respond to Requests for Information (RFI) from fire alarm system contractor during the installation phase . • Conduct one site visit to evaluate the progress of work and identify/address any issues of concern . • Provide on review of the as-built drawings , to be prepared by the Fire Alarm Contractor following completion of the fire alarm system installation . Prepare a letter report addressing any questions or concerns related to the as-built drawing review .