2014-009A - Laserfiche WebLink

Home Browse Search

silt fence fabric. All supporting posts shall be on the down-slope side of the fencing. Place the bottom of the fabric 6 -inches minimum, under compacted soil to prevent the flow of sediment underneath the fence. Place silt fences away from the toe of slopes. Otherwise, install in accordance with FDOT Index No. 102. 3. Product: All material shall be new and unused. Use FDOT Types II through IV silt fences where Targe sediment loads are anticipated, where slopes are 1:2 (vertical: horizontal) or steeper, or as directed by the ENGINEER; otherwise use FDOT Type III silt fence. (a) For FDOT Type III Silt Fence - ACF Environmental, Catalog No. 360800000, Florida DOT Silt Fence. U.S. Sieve = 30, tensile strength = 120 pounds. The heavy-duty filter fabric shall be pre -attached to 48 -inch long stakes on 6 -foot centers. (1-800-448-3636). (b) For FDOT Type IV Silt Fence, modify the above Catalog No. 360800000 to comply with FDOT Index No. 102. (c) Or equivalent. C. Turbidity Barriers: 1. General: Use turbidity barriers to control sediment contamination of rivers, lakes, ponds, canals, etc. 2. Installation: Install per the manufacturers recommendations and per FDOT Index No. 103 unless directed otherwise by the ENGINEER 3. Product: All material shall be new and unused. The turbidity barrier shall be a pervious barrier and the fabric color shall be yellow. a. Parker Systems, Inc.(1-866-472-7537),model Type 11 or Type 1 b. Or equivalent. D. Sedimentation Control From Dewatennq or Pumping Operations Using Filter Bags 1. Remove silt, sediment, and other particles from dewatering or pumping applications using a filter bag. The bag shall be manufactured using a polypropylene non -woven geotextile and sewn by a double -needle machine, using a high strength nylon thread. The bag shall have a fill spout large enough to accommodate a 4 -inch pump discharge hose. Straps shall be attached to the bag to secure the hose and prevent pumped water from escaping without being filtered. 2. Installation: Install in accordance with the manufacturer's specifications. Use as many filter bags as required, at no additional cost to the OWNER Legally dispose of the bags offsite, at no cost to the OWNER If the bags are placed on aggregate to facilitate filtration efficiency, do not use limerock aggregate. 3. Product: The filter bag shall be supplied with lifting straps. a. "DIRTBAG 53 or 55 as applicable," supplied by ACF Environmental, Inc. (1-800-448-3636). b. "DANDY DEWATERING BAG" supplied by Dandy Products, Inc. (1-800- 591-2284). c. Or equivalent. E Curb Inlet Protection: 1. Filter stormwater before it enters curb inlets 2. Installation: Install in accordance with the manufacturer's specifications. Use as many of the specified filtration devices as required, at no additional cost to the OWNER 01025-8 Technical Specifications F:\Public Works\ENGINEERING DIVISION PROJECTS\1302-IR Blvd Resurfacing (SCOP) US1 to 17th St\Admim\bid documents\Technical Specifications.doc