2010-111 - Laserfiche WebLink

Home Browse Search

SECTION 01170 SPECIAL PROVISIONS PART 1 — GENERAL 1901 INSTALLATION OF EQUIPMENT A . Special care shall be taken to ensure proper alignment of all equipment with particular reference to the pumps and electric drives . The units shall be carefully aligned on their foundations by qualified millwrights after their sole plates have been shimmed to true alignment at the anchor bolts . The anchor bolts shall be set in place and the nuts tightened against the shims . After the foundation alignments have been completed, the bedplates or wing feet of the equipment shall be securely bolted in place . The alignment of equipment shall be further checked after securing to the foundations , and after conformation of all alignments , the sole plates shall be finally grouted in place . The Contractor shall be responsible for the exact alignment of equipment with associated piping and under no circumstances , will "pipe springing " be allowed . Be All wedges , shims, filling pieces , keys , packing , grout, or other materials necessary to properly align , level and secure apparatus in place shall be furnished by the Contractor. All parts intended to be plumb or level must be proven exactly so . Perform all grinding necessary to bring parts to proper bearing after erection . 1 . 02 SLEEVES AND OPENINGS A . Provide all openings, channels, chases , etc , in new construction and furnish and install anchor bolts and other items to be embedded in concrete , as required to complete the work under this Contract . Perform all cutting , coring and rough and finish patching required in existing construction for the work of all trades . Be Subcontractors shall furnish all sleeves , inserts , hangers, anchor bolts , etc , required for the execution of their work . It shall be their responsibility before the work of the Contractor is begun to furnish him with the above items and with templates , drawings or written information covering chases , openings , etc, which they require and to follow up the work of the Contractor as it progresses, making sure that their drawings and written instructions are carried out . Failing to do this , they shall be responsible for the cost of any corrective measures which may be required to provide necessary openings, etc . If the Contractor fails to carry out the directions given him , covering details and locations of openings , etc , he shall be responsible for any cutting and refinishing required to make the necessary corrections . In no case shall beams , lintels, or other structural members be cut without the approval of the Engineer . 1 . 03 RELOCATION A . The Contractor shall be responsible for the relocation of structures , including but not limited to light poles , signs, sign poles , fences , piping , conduits and drains that interfere with the positioning of the work as set out on the Drawings . The cost of all such 01170 - 1