Laserfiche WebLink
SECTION 108 — RECORD DRAWINGS/AS-BUILTS <br /> INDIAN RIVER COUNTY <br /> AS - BUILT STANDARDS <br /> GENERAL <br /> Maintain , prepare and provide the ENGINEER with record documents as specified below, <br /> except where otherwise specified or modified within the scope of work provided in the specific <br /> project contract documents . The Contractor and/or Developer shall be responsible for, and <br /> required to provide , Record Drawings as outlined in this section . <br /> MAINTENANCE OF RECORD DOCUMENTS : <br /> 1 . Maintain in CONTRACTOR' s field office in clean , dry , legible condition complete <br /> sets of the following project documents : Drawings , Specifications , Addenda , <br /> approved Shop Drawings , samples , photographs , Change Orders , other modifi- <br /> cations of Contract Documents , test records , survey data , Field Orders , and all <br /> other documents pertinent to CONTRACTOR' S Work . <br /> 2 . Provide files and racks for proper storage and easy access . <br /> 3 . Makedocuments available at all times for inspection by ENGINEER and <br /> OWNER . <br /> 4 . Do not use record documents for any other purpose and do not remove them <br /> from the field office . <br /> 5 . Label each document " RECORD DRAWING" in 2-inch high printed letters . <br /> 6 . Keep record documents current at all times . <br /> 7 . No work shall be permanently concealed until the required record data has been <br /> obtained . <br /> RECORD / AS-BUILT DRAWINGS <br /> A. During the construction operation , the CONTRACTOR shall maintain records of <br /> all deviations from the approved Project Plans and Specifications and shall prepare <br /> therefrom " RECORD" drawings showing correctly and accurately all changes and <br /> deviations from the work made during construction to reflect the work as it was actually <br /> constructed . <br /> B . The Record/As- Built survey shall be performed and subsequent plans prepared <br /> by a Professional Surveyor and Mapper, registered in the state of Florida and <br /> certified to the standards set forth in Chapter 472 , Florida Statutes and Chapter 5J - <br /> 17 . 050 Florida Administrative Code ( Florida Minimum Technical Standards) . <br /> C . Field measurements of vertical or horizontal dimensions of constructed <br /> improvements shall be obtained so that the constructed facility can be delineated in <br /> such a way that the location of the construction may be compared with the <br /> 01025- 13 Technical Specifications <br /> F:\Public Works\ENGINEERING DIVISION PROJECTS\1102-Old Dixie Hwy Swk 8th St to SR 60-LAPWdmim\bid documents\Nlaster <br /> Contract Documents\Technical Specifications.doc <br />