Laserfiche WebLink
ORDINANCE NO. 98m 0 9 <br />2. Internally illuminated aluminum cabinet with textured finish, and cut-out inset o <br />hr <br />ush through acrylic letters. (Note that color may applied to the "first surface" on <br />push through acrylic letters for this tyke of signs) <br />3. Backlit reverse pan channel letters (opaque faced) mounted on sign that is <br />harmonious with the project's architecture. <br />4. Signage that relates to the building's style of architecture and materials. <br />5. Thematic signage. <br />6. Where allowed, changeable copy signs that have a dark opaque background with <br />translucent lettering. <br />(e� Reduction in Sign Sizes and Dimensions <br />1. Freestanding Signs: <br />i. Maximum cumulative signage: Reduce to 50% of what is allowed in Table <br />I. except for I-95 signs as described in His below. <br />ii. Maximum signage on a single face: Reduce to 50% of what is allowed in <br />Table 1. except for I-95 signs as described in iii, below. <br />iii. Maximum height: Reduce to 30% of what is allowed in Table 1, but no less <br />than six (6) feet and no ,greater than ten (10) feet. Maximum height and size <br />modifications do not apply o properties located within one thousand (1 000) <br />feet of I-95 entrance or exit ramps where an applicant demonstrates that a <br />taller proposed sign is oriented so as to be seen by I-95 motorists approaching <br />the SR 60 interchange. Any pole for such a sign shall be colored dark <br />bronze, black, or dark green. All other special `restrictions and prohibitions <br />shallshall annly. <br />iv. For development involving sites of 40 acres or more the 10' sign height <br />requirement may be waived by the Board of County Commissioners if the <br />development project applicant prepares and the Board of County <br />Commissioners approves a sign package that reduces the total sign area <br />otherwise allowed under the corridor plan and sign ordinance by 10% or <br />more. Outparcels on larger sites shall comply with the 6' to 10' height <br />limitations specified above. <br />Modifications <br />to Table 1 (freestanding <br />signs) and <br />Table <br />2 (wall <br />signs), Schedule <br />of <br />v. Required <br />setbacks <br />to 50% <br />of is <br />or <br />Table <br />right <br />Regulations <br />-of --way: <br />for Permanent Signs <br />Requiring <br />Permits, <br />sign <br />ordinance. <br />1. Freestanding Signs: <br />i. Maximum cumulative signage: Reduce to 50% of what is allowed in Table <br />I. except for I-95 signs as described in His below. <br />ii. Maximum signage on a single face: Reduce to 50% of what is allowed in <br />Table 1. except for I-95 signs as described in iii, below. <br />iii. Maximum height: Reduce to 30% of what is allowed in Table 1, but no less <br />than six (6) feet and no ,greater than ten (10) feet. Maximum height and size <br />modifications do not apply o properties located within one thousand (1 000) <br />feet of I-95 entrance or exit ramps where an applicant demonstrates that a <br />taller proposed sign is oriented so as to be seen by I-95 motorists approaching <br />the SR 60 interchange. Any pole for such a sign shall be colored dark <br />bronze, black, or dark green. All other special `restrictions and prohibitions <br />shallshall annly. <br />iv. For development involving sites of 40 acres or more the 10' sign height <br />requirement may be waived by the Board of County Commissioners if the <br />development project applicant prepares and the Board of County <br />Commissioners approves a sign package that reduces the total sign area <br />otherwise allowed under the corridor plan and sign ordinance by 10% or <br />more. Outparcels on larger sites shall comply with the 6' to 10' height <br />limitations specified above. <br />2. Wall/Facade Signs <br />from <br />lines <br />1' <br />v. Required <br />setbacks <br />to 50% <br />of is <br />or <br />Table <br />right <br />-of --way: <br />subject <br />what allowed <br />to <br />property <br />satisfaction <br />of sight distance <br />requirements. <br />Number <br />frontage: <br />No <br />from Table <br />1. <br />vi. <br />of allowable signs <br />ler street <br />change <br />Footnote <br />92 of Table 1 shall <br />be modified, requiring <br />a <br />minimum of two <br />hundred <br />(200) feet of separation <br />between signs <br />along <br />the same street <br />frontage. <br />2. Wall/Facade Signs <br />Coding: Words in strnce-rmsov type are deletions from existing law. Words underlined are <br />additions. <br />44 <br />i. Maximum <br />Reduce <br />to 50% <br />of is <br />in <br />Table <br />2. <br />sign area <br />allowed: <br />what allowed <br />Coding: Words in strnce-rmsov type are deletions from existing law. Words underlined are <br />additions. <br />44 <br />