2007-013 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. 2007-013 (12) Sludges, screenings, or other residues from the pretreatment of industrial waste, unless permitted to do so; (13) Wastewater causing, alone or in conjunction with other sources, the treatment plant's effluent to fail a toxicity test; (14) Detergents, surface-active agents, or other substances which may cause excessive foaming in the POTW; or (15) Fats, oils, or greases of animal or vegetable origin in concentrations greater than in Section 201.68 of this Ordinance; (C) Pollutants, substances, or wastewater prohibited by this section 201.65 shall not be processed or stored in such a manner that they could be discharged to the POTW. SECTION 8. CREATION OF NEW SECTION 201.66 OF THE CODE Commencing on the Effective Date of this Ordinance, the following section is created to read as follows: Section 201.66. National Categorical Pretreatment Standards (A) The categorical pretreatment standards found at 40 CFR Chapter 1, Subchapter N, Parts 405-471 are hereby incorporated herein in their entirety by this reference as if fully set forth herein. (B) Where a categorical pretreatment standard is expressed only in terms of either the mass or the concentration of a pollutant in wastewater, the County Administrator may impose equivalent concentration or mass limits in accordance with Rule 62-625.410(4), F.A.C. (C) When wastewater subject to a categorical pretreatment standard is mixed with wastewater not regulated by the same standard, the County Administrator shall impose an alternate limit using the combined wastestream formula in Rule 62-625.410(6), F.A.C. (D) A user may obtain a variance from a categorical pretreatment standard if the user can prove, pursuant to the procedural and substantive provisions in Rule 62-625.700, F.A.C., that factors relating to its discharge are fundamentally different from the factors considered by EPA when developing the categorical pretreatment standard. (E) A user may obtain a net gross adjustment to a categorical standard in accordance with 40 CFR 403.15 and Rule 62-625.820, F.A.C. 11