2005-017 - Laserfiche WebLink

Home Browse Search

ORDINANCE 2005- 017 (8) Colors and building graphics. (a) The following building graphics are prohibited: polka dots, circles, vertical stripes, diagonal stripes or lines, plaids, animals, and symbols such as lightning bolts. However, legally registered trademarks, which directly relate to the building occupant (not trademarks of products or services sold or displayed) are allowed, subject to applicable sign and color regulations. (b) Color Standards. All buildings and accessory structures within the SR 60 Corridor shall be limited to the following colors: 1. Base building colors: Base building colors relate to wall and parapet wall areas and shall be limited to the colors listed in the SR 60 Corridor Master Color List. These colors consist of white and light neutral colors in the warm range. 2. Secondary building colors: Secondary building colors relate to larger trim areas and shall be limited to the colors listed in the SR 60 Corridor Master Color List, Secondary building colors shall not exceed thirty (30) percent of the surface area of any one building facade elevation. These colors consist of a mid-range intensity of the base building colors and complementary colors, and include all base building colors. 3. Trim colors: Trim colors are used for accent of smaller trim areas, are the brightest group of colors allowed, and include all base building and secondary building colors. Use of metallic colors (i.e.: gold, silver, bronze, chrome, etc ... ) and use of garish colors, such as fluorescent colors (e.g. hot pink, shocking yellow), is prohibited. Trim colors shall not exceed ten (10) percent of the surface area of any one building facade elevation. Where trim colors are used in a building facade sign, the trim color area of the facade sign shall be included in the percentage limitation on the trim color surface area. 4. Roof colors (requirements for roofs that are visible from a roadway and/or residentially designated area): Metal roof colors shall be limited to the colors listed in the SR 60 Corridor Master Color List's "Metal Roof Colors." These colors consist of natural mill finish, white, light neutral colors in the warm range, blue, and a limited number of earth -tone colors. Mixing or alternating colors of metal panels is prohibited. For non-metal roofs, other than natural variations in color or color blends within a tile, the mixing or alternating of roof color in the same roof material is prohibited. Colors and color blends shall not be contrary to the intent of this code. Color for roofing, which is glazed, slurry coated, or artificially colored on the surface by any other means shall be limited to the same colors as approved for metal roofs. 5. Natural finish materials: The color requirements listed above shall not apply to the colors of true natural finish materials such as brick, stone, terra cotta, concrete roof tiles, slate, integrally colored concrete masonry units, copper, NOTE: All wording is new wording for new Section 911.22 F:\Community Development\Users\CurDev\ORDINANCE\2005\Chapter 911.22 Other Corridors.rtf 13