2004-005 - Laserfiche WebLink

Home Browse Search

ORDINANCE 2004- 005 2. Parapet walls located at the building roof -top edge may extend no more than five (5) feet above the building height limitations (thirty-five (35) feet or forty-five (45) feet, as applicable). 3. Other than the parapet wall provision references in 911.15(1)(b)2. above, roof -top structures such as screen walls, elevator shafts and enclosures, stairways and enclosures, and similar structures shall be set back from the building roof -top edge one (1) foot horizontal distance for every one (1) foot of vertical rise above the applicable building height limitation. (c) Coastal hotel, motel and resort development height exceptions. The height limitations stipulated in the CG, General Commercial District, may be modified for hotels, motels, and resort developments located east of State Road Al A provided that no building structure exceeds the height limits for airport approach areas and provided that the following criteria are met: One and one-half (1 be forty-five 1/2) feet of additional any building structure allowed to exceed (45) height setback from the coastal construction control line (CCCL) shall be provided for each foot in height West 2,000 exceeding thirty-five (35) feet. height 2. Once the additional setback is established, all structures exceeding six (6) feet in height shall be prohibited within the designated additional setback area. 2. A minimum setback of 1,000 feet from arterial and major collector roadways (such as SR60) to the portion of the building that exceeds general height limitations. 3. A minimum setback of 200 feet from the perimeter of the industrial park or subdivision to the portion of the building that exceeds general height limitations and a Type "C" buffer along that perimeter. Where that perimeter abuts residentially designated property all required buffer landscape materials, prior to C.O. (Certificate of Occupancy) of the tall building shall have sizes that meet or exceed the "replacement landscaping" standards of section 926.12(3) specified for projects more than 18 months old. be forty-five 3. In no case shall any building structure allowed to exceed (45) height 1. A minimum feet in height. setback 2. A minimum setback of 1,000 feet from arterial and major collector roadways (such as SR60) to the portion of the building that exceeds general height limitations. 3. A minimum setback of 200 feet from the perimeter of the industrial park or subdivision to the portion of the building that exceeds general height limitations and a Type "C" buffer along that perimeter. Where that perimeter abuts residentially designated property all required buffer landscape materials, prior to C.O. (Certificate of Occupancy) of the tall building shall have sizes that meet or exceed the "replacement landscaping" standards of section 926.12(3) specified for projects more than 18 months old. 4. A maximum building height 1. A minimum setback West 2,000 feet from height I-95 The to height limitations in of county building industrial park exception. that stipulated the IL (Light Industrial), IG (General Industrial), and PD industrial zoning districts may be modified for industrial and warehouse distribution buildings located west of I-95 in within industrial parks and subdivisions 100 acres or larger size. Building heights be the following_ may modified upon a showing of compliance with 2. A minimum setback of 1,000 feet from arterial and major collector roadways (such as SR60) to the portion of the building that exceeds general height limitations. 3. A minimum setback of 200 feet from the perimeter of the industrial park or subdivision to the portion of the building that exceeds general height limitations and a Type "C" buffer along that perimeter. Where that perimeter abuts residentially designated property all required buffer landscape materials, prior to C.O. (Certificate of Occupancy) of the tall building shall have sizes that meet or exceed the "replacement landscaping" standards of section 926.12(3) specified for projects more than 18 months old. 4. A maximum building height 1. A minimum setback of 2,000 feet from I-95 to the of the building that portion 2. A minimum setback of 1,000 feet from arterial and major collector roadways (such as SR60) to the portion of the building that exceeds general height limitations. 3. A minimum setback of 200 feet from the perimeter of the industrial park or subdivision to the portion of the building that exceeds general height limitations and a Type "C" buffer along that perimeter. Where that perimeter abuts residentially designated property all required buffer landscape materials, prior to C.O. (Certificate of Occupancy) of the tall building shall have sizes that meet or exceed the "replacement landscaping" standards of section 926.12(3) specified for projects more than 18 months old. Coding: Words in stFi� e thFOUgh type are deletions from existing law. Words underlined are additions. Page 2 of 4 F:\Community Development\Users\CurDev\ORDINANCE\Industrial Park Height Exceptions 020204.doc 4. A maximum building height of 80 feet. Coding: Words in stFi� e thFOUgh type are deletions from existing law. Words underlined are additions. Page 2 of 4 F:\Community Development\Users\CurDev\ORDINANCE\Industrial Park Height Exceptions 020204.doc