Laserfiche WebLink
Comprehensive Plan Capital Improvements Element <br />residential unit. Other public facility rates are discussed fully in their applicable Comprehensive Plan <br />Element. <br />Like existing demand, committed demand must be determined on a facility by facility basis. For <br />example, both existing demand and committed demand must be determined for each maj or roadway, <br />each school, each treatment plant, each major drainage conveyance, and the active cell in the landfill. <br />Also, like existing demand, committed demand estimates must be modified as projects are completed; <br />committed demand estimates must also be modified as new development orders are approved and old <br />development orders are terminated. <br />Projected Demand <br />The third type of demand is projected demand. This consists of two types. One is non- <br />committed/non-reserved, single-family lot demand for all subdivisions platted after February 13, <br />1990, while the other is new project demand. <br />Non-committed/non-reserved single-family lot projected demand relates to the facility impacts <br />associated with construction on single-family lots in subdivisions platted after February 13, 1990 and <br />construction on single-family unplatted lots and acreage. Since this type of construction will impact <br />facilities, the demand anticipated from this type of activity must be considered in facility expansion <br />plans. For this reason, it is necessary to maintain an accurate inventory of unbuilt, platted lots and <br />consider the impacts of construction on these lots. <br />The second type of projected demand is new project demand. For each new project, demand <br />estimates must be made on a facility by facility basis. Only if sufficient available capacity exists for <br />each facility to be impacted can the project be approved and a development order issued. Upon <br />issuance of a development order, the estimated impacts on each facility would be .considered as <br />committed demand. <br />Availability of Capacity <br />Facility capacity can be assessed two different ways. First, facility capacity can be determined by <br />facilities that are existing and available; examples would be existing treatment plants and existing <br />roadways with a set number of lanes. The second manner for assessing facility capacity is to consider <br />both existing, in -the -ground facilities as well as facility expansions or new facilities which are <br />programmed but not yet existing. <br />According to Chapter 9J-5.0055(3), Minimum Requirements For Concurrency, Florida <br />Administrative Code, the capacity of existing, in -the -ground facilities will be considered in all cases. <br />Programmed facilities will be considered in assessing capacity for each public facility category when <br />the following conditions are met: <br />Community Development Department Indian River County <br />45 <br />