Laserfiche WebLink
1. The date of submission and the dates of any previous <br />submissions. <br />2. The project title and number <br />3. Contract identification <br />4. The name of: <br />a. Contractor <br />b. Supplier <br />C. Manufacturer <br />5. Identification of the project, with specification section number. <br />6. Field dimensions, clearly identified as such. <br />7. Relation to adjacent or critical features of the Work or <br />materials. <br />8. Applicable standards, such as ASTM or Federal Specification <br />numbers. <br />9. Identification of deviations from Contract Documents <br />10. Identification of revisions on resub�inittals. <br />11. An 8" x 3" blank space for Contractor and Engineer stamps <br />12. Contractor's stamp or review and approval, initialed or signed, <br />certifying to review of initialed or signed, certifying to review of <br />submittal, verification of products, field measurements and field <br />construction criteria, and coordination of the information within <br />the submittal with requirements of the work and of Contract <br />Documents. <br />1.09 RESUBMISSION REQUIREMENTS <br />A. Make any corrections or changes in the submittals required by the <br />Engineer and resubmit until approved. <br />B. Shop Drawings and Product Data: <br />1. Revise initial drawings or data, and resubmit as specified for <br />initial submittal. <br />2. Indicate any changes which have been made other than those <br />requested by the Engineer. <br />C. Samples: Submit new samples as required for initial submittal. <br />1.10 DISTRIBUTION <br />A. Distribute reproductions of Shop Drawings and copies of Product Data <br />which carry the Engineer's stamp or review to: <br />1. Job site file. <br />2. Record Documents file. <br />3. Other affected contractors <br />01340 Shop Drawings, Product Data and Samples.doc <br />01340-4 <br />e <br />