2009-280 - Laserfiche WebLink

Home Browse Search

— in-directly,-irr-whote-O -in art b Conator; any Sub—con-1.- - __..Shop -Drawings-- tractor, Supplier, or any other individual or entity directly or indirectly employed by any of them to perform any of a. Submit number of copies specified in the the Work, or anyone for whose acts any of them may be General Requirements. liable, shall be remedied by Contractor (except damage or loss attributable to the fault of Drawings or Specifications Engineer or, or b. Data shown on the Shop Drawings will be or to the acts or omissions of Owner or En g complete with respect to quantities, dimensions, anyone employed by any of them, or anyone for whose specified acts any of them may be liable, and not attributable P performance and design criteria, materials, and similar data to show Engineer the directly or indirectly, in whole or in part, to the fault or lier, services, materials, and equipment Contractor negligence of Contractor or any Subcontractor, Su PP , proposes to provide and to enable Engineer to or other individual or entity directly or indirectly em- review the information for the limited purposes ployed by any of them). required by Paragraph 6.17.D. D. Contractor's duties and responsibilities for safety and for protection of the Work shall continue until such time as a]I the Work is completed and Engineer has issued a notice to Owner and Contractor in accordance with Paragraph 14.07.B that the Work is acceptable (except as otherwise expressly provided in connection with Substantial Completion). 6.14 Safety Representative A. Contractor shall designate a qualified and experienced safety representative at the Site whose duties and responsibilities shall be the prevention of accidents and the maintaining and supervising of safety precautions and programs. 6.15 Hazard Communication Programs A. Contractor shall be responsible for coordinating any exchange of material safety data sheets or other hazard communication information required to be made available to or exchanged between or among employers at the Site in accordance with Laws or Regulations. 6.16 Emergencies A. In emergencies affecting the safety or protection of persons or the Work or property at the Site or adjacent thereto, Contractor is obligated to act to prevent threatened damage, injury, or loss. Contractor shall give Engineer prompt written notice if Contractor believes that any significant changes in the Work or variations from the Contract Documents have been caused thereby or are required as a result thereof. If Engineer determines that a change in the Contract Documents is required because of the action taken by Contractor in response to such an emergency, a Work Change Directive or Change Order will be issued. 2. Samples: Contractor shall also submit Samples to Engineer for review and approval in accordance with the acceptable schedule of Shop Drawings and Sample submittals. a. Submit number of Samples specified in the Specifications. b. Clearly identify each Sample as to material, Supplier, pertinent data such as catalog numbers, the use for which intended and other data as Engineer may require to enable Engineer to review the submittal for the limited purposes required by Paragraph 6.17.D. B. Where a Shop Drawing or Sample is required by the Contract Documents or the Schedule of Submittals, any related Work performed prior to Engineer's review and approval of the pertinent submittal will be at the sole expense and responsibility of Contractor. C. Submittal Procedures 1. Before submitting each Shop Drawing or Sample, Contractor shall have determined and veri- fied: a. all field measurements, quantities, dimen- sions, specified performance and design criteria, installation requirements, materials, catalog numbers, and similar information with respect thereto; b. the suitability of all materials with respect to intended use, fabrication, shipping, handling, storage, assembly, and installation pertaining to the performance of the Work; c. all information relative to Contractor's 6.17 Shop Drawings and Samples responsibilities for means, methods, techniques, A. Contractor shall submit Sho P Drawin sand Sam les sequences, and procedures of construction, and g P safety precautions and programs incident thereto; to Engineer for review and approval in accordance with and the acceptable Schedule of Submittals (as required by Paragraph 2.07). Each submittal will be identified as d. shall also have reviewed and coordinated each Engineer may require. Shop Drawing or Sample with other Shop Drawings and Samples and with the EJCDC C-700 Standard General Conditions of the Construction Contract. Copyright C 2002 National Society of Professional Engineers for EJCDC. All rights reserved. 00700-23