Laserfiche WebLink
SECTION 01700 <br />CONTRACT CLOSEOUT <br />PART 1 — GENERAL <br />1.01 SCOPE OF WORK <br />A. This Section specifies administrative and procedural requirements for project <br />closeout, including but not limited to: <br />1. Closeout procedures. <br />2. Final cleaning. <br />3. Adjusting. <br />4. Project Record documents. <br />5. Spare parts and maintenance materials. <br />1.02 RELATED WORK <br />A. Warranties and Bonds are included in Section 01740. <br />1.03 RECORD DOCUMENTS <br />A. Maintain on site, one set of the following documents; actual revisions to the work <br />shall be recorded in these documents: <br />1. Contract Drawings. <br />2. Specifications. <br />3. Addenda. <br />4. Change Orders and other Modifications to the Contract. <br />5. Reviewed shop drawings, product data, and samples. <br />B. Store Record Documents separate from documents used for construction. <br />C. Record information concurrent with construction progress. <br />D. Specifications: Legibly mark and record at each product section description of actual <br />products installed, including the following: <br />1. Manufacturer's name and product model and number. <br />2. Product substitutions or alternates utilized. <br />3. Changes made by Addenda and Modifications. <br />E. Contract Drawings and Shop Drawings: Legibly mark each item to record actual <br />construction including: <br />1. Measured depths of foundations in relation to finish floor elevation datum. <br />2. Measured horizontal and vertical locations of underground utilities and <br />appurtenances, referenced to permanent surface improvements. <br />3. Measured locations of internal utilities and appurtenances concealed in <br />construction, referenced to visible and accessible features of the work. <br />4. Field changes of dimension and detail. <br />5. Details not on original Contract Drawings. <br />01700-1 <br />DADIVISION 1\01700 Contract Closeout.doc <br />