Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />d. Kosher Certified. <br />Property <br />Flexural Strength <br />Flexural Modulus <br />Flexural Elongation <br />Compression Strength (Dry) <br />Compression Strength (Wet) <br />Hardness <br />Thermal Expansion <br />Gloss (60° Gardner) <br />Colorfastness <br />Wear and Cleanability <br />Stain Resistance <br />(stain 5.2, chemical 5.5, cigarette <br />Fungal and Bacterial Resistance <br />High Temperature <br />Resistance (356°F) <br />Boiling Water Resistance <br />Freeze -Thaw Cycling <br />Point Impact <br />Ball Impact <br />Slip Resistance <br />Static Coefficient of Friction <br />(as received) <br />Static Coefficient of Friction <br />(with renovator) <br />Abrasion Resistance <br />Specific Gravity <br />Density <br />Water Absorption <br />Long- and Short -Term <br />Moisture Expansion <br />Toxicity <br />Flammability <br />UL 723 <br />(Class I and Class A) <br />Flame Spread Index <br />Smoke Developed Index <br />Nominal Thickness <br />Nominal Weight <br />15 lb./ft.2 (3 cm) <br />Typical Result <br />>5,300 psi <br />5.3-5.7E6 psi <br />>0.1 % <br />—27,000 psi <br />—24,000 psi <br />7 <br />1.45 x 10-5 in./in./°C <br />45-50 <br />Passes <br />Passes <br />Passes <br />5.4 resistances) <br />No growth <br />None to slight effect <br />None to slight effect <br />Unaffected <br />Passes <br />164 inches <br />Above 0.80 for textured models <br />0.89/0.61 (wet/dry) <br />0.87/0.65 (wet/dry) <br />139 <br />2.44 <br />—2400 kg/m3 <br />0.12% <br /><0.04% <br /><0.01% on average <br />Passes, LC50=68-128 <br />For all colors tested <br />and NFPA 255 <br />FSI <10 for 3 cm and <15 for 2 cm <br />SDI <50 for 3 cm and <100 for 2 cm <br />2 cm and 3 cm <br />10 lb./ft.2 (2 cm) <br />* NEMA results based on the NEMA LD 3-2000 <br />2.3 ACCESSORY PRODUCTS <br />A. Joint adhesive: <br />1. Cosentino -approved adhesive to create color -matched seam. <br />B. Sink/bowl mounting hardware: <br />Test Procedure <br />ASTM D 790 <br />ASTM D 790 <br />ASTM D 790 <br />ASTM C 170 <br />ASTM C 170 <br />Mohs' Hardness Scale <br />ASTM D 696 <br />ANSI Z 124 <br />ANSI Z 124.6.5.1 <br />ANSI Z 124.6.5.3 <br />ANSI Z 124.6 <br />ASTM G 21 & G 22 <br />NEMA LD 3.3.6* <br />NEMA LD 3.3.5* <br />ASTM C 1026 <br />ANSI Z 124.6.4.2 <br />NEMA LD 3.3.8* <br />ASTM C 1028 <br />ASTM C 1028 <br />ASTM C 1028 <br />ASTM C 501 <br />ASTM D 792 <br />ASTM C 373 <br />ASTM D 570 <br />ASTM C 370 <br />Pittsburgh Protocol <br />ASTM E 84, <br />QUARTZ SURFACE FABRICATIONS <br />04731-5 <br />