Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />SECTION 051200 - STRUCTURAL STEEL FRAMING <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. Structural steel. <br />B. Related Sections: <br />1. Division 01 Section "Quality Requirements" for independent testing agency procedures <br />and administrative requirements. <br />2. Division 05 Section "Architecturally Exposed Structural Steel Framing" for additional <br />requirements for architecturally exposed structural steel. <br />3. Division 05 Section "Steel Decking" for field installation of shear connectors through <br />deck. <br />4. Division 05 Section "Metal Fabrications" for steel lintels and shelf angles not attached to <br />structural -steel frame, miscellaneous steel fabrications and other metal items not defined <br />as structural steel. <br />5. Division 05 Section "Metal Stairs." <br />6. Division 09 painting Sections for surface -preparation and priming requirements. <br />7. Division 13 Section "Metal Building Systems" for structural steel. <br />1.3 DEFINITIONS <br />A. Structural Steel: Elements of structural -steel frame, as classified by AISC 303, "Code of <br />Standard Practice for Steel Buildings and Bridges." <br />B. Seismic -Load -Resisting System: Elements of structural -steel frame designated as "SLRS" or <br />along grid lines designated as "SLRS" on Drawings, including columns, beams, and braces and <br />their connections. <br />C. Heavy Sections: Rolled and built-up sections as follows: <br />1. Shapes included in ASTM A 6/A 6M with flanges thicker than 1-1/2 inches. <br />2. Welded built-up members with plates thicker than 2 inches. <br />3. Column base plates thicker than 2 inches. <br />D. Protected Zone: Structural members or portions of structural members indicated as "Protected <br />Zone" on Drawings. Connections of structural and nonstructural elements to protected zones <br />are limited. <br />STRUCTURAL STEEL FRAMING 051200-1 <br />