Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />4. For equipment, include the following in addition to the above, as applicable: <br />a. Wiring diagrams showing factory -installed wiring. <br />b. Printed performance curves. <br />c. Operational range diagrams. <br />d. Clearances required to other construction, if not indicated on accompanying Shop <br />Drawings. <br />5. Submit Product Data before or concurrent with Samples. <br />6. Submit Product Data in the following format: <br />a. PDF electronic file. <br />b. Three paper copies of Product Data unless otherwise indicated. Architect will <br />return two copies. <br />C. Shop Drawings: Prepare Project -specific information, drawn accurately to scale. Do not base <br />Shop Drawings on reproductions of the Contract Documents or standard printed data. <br />1. Preparation: Fully illustrate requirements in the Contract Documents. Include the <br />following information, as applicable: <br />a. Identification of products. <br />b. Schedules. <br />c. Compliance with specified standards. <br />d. Notation of coordination requirements. <br />e. Notation of dimensions established by field measurement. <br />f. Relationship and attachment to adjoining construction clearly indicated. <br />g. Seal and signature of professional engineer if specified. <br />2. Sheet Size: Except for templates, patterns, and similar full-size drawings, submit Shop <br />Drawings on sheets at least 8-1/2 by 11 inches (215 by 280 mm), but no larger than 30 by <br />42 inches (750 by 1067 mm. <br />3. Submit Shop Drawings in the following format: <br />a. PDF electronic file. <br />D. Samples: Submit Samples for review of kind, color, pattern, and texture for a check of these <br />characteristics with other elements and for a comparison of these characteristics between <br />submittal and actual component as delivered and installed. <br />1. Transmit Samples that contain multiple, related components such as accessories together <br />in one submittal package. <br />2. Identification: Attach label on unexposed side of Samples that includes the following: <br />a. Generic description of Sample. <br />b. Product name and name of manufacturer. <br />c. Sample source. <br />d. Number and title of applicable Specification Section. <br />e. Specification paragraph number and generic name of each item. <br />SUBMITTAL PROCEDURES 01 33 00 - 7 <br />