Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />T. Preconstruction Test' Reports: Submit reports written by a qualified testing agency, on testing <br />agency's standard form, indicating and interpreting results of tests performed before installation <br />of product, for compliance with performance requirements in the Contract Documents. <br />U. Compatibility Test Reports: Submit reports written by a qualified testing agency, on testing <br />agency's standard form, indicating and interpreting results of compatibility tests performed <br />before installation of product. Include written recommendations for primers and substrate <br />preparation needed for adhesion. <br />V. Field Test Reports: Submit written reports indicating and interpreting results of field tests <br />performed either during installation of product or after product is installed in its final location, <br />for compliance with requirements in the Contract Documents. <br />W. Design Data: Prepare and submit written and graphic information, including, but not limited to, <br />performance and design criteria, list of applicable codes and regulations, and calculations. <br />Include List of assumptions and other performance and design criteria and a summary of loads. <br />Include load diagrams if applicable. Provide name and version of software, if any, used for <br />calculations. Include page numbers. <br />2.2 DELEGATED -DESIGN SERVICES <br />A. Perfonnance and Design Criteria: Where professional design services or certifications by a <br />design professional are specifically required of Contractor by the Contract Documents, provide <br />products and systems complying with specific performance and design criteria indicated. <br />1. If criteria indicated are not sufficient to perform services or certification required, submit <br />a written request for additional information to Architect. <br />B. Delegated -Design Services Certification: In addition to Shop Drawings, Product Data, and <br />other required submittals, submit digitally signed PDF electronic file and three paper copies of <br />certificate, signed and sealed by the responsible design professional, for each product and <br />system specifically assigned to Contractor to be designed or certified by a design professional. <br />1. Indicate that products and systems comply with performance and design criteria in the <br />Contract Documents. Include list of codes, loads, and other factors used in performing <br />these services. <br />PART 3 - EXECUTION <br />3.1 CONTRACTOR'S REVIEW <br />A. Action and Informational Submittals: Review each submittal and check for coordination with <br />other Work of the Contract and for compliance with the Contract Documents. Note corrections <br />and field dimensions. Mark with approval stamp before submitting to Architect. <br />B. Project Closeout and Maintenance Material Submittals: See requirements in Section 01770 <br />"Closeout Procedures." <br />SUBMITTAL PROCEDURES 01 33 00 - 10 <br />