Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />1.7 DELIVERY, STORAGE, AND HANDLING <br />A. Deliver MVRA in manufacturer's original, undamaged containers. <br />B. Store MVRA protected from exposure to harmful weather conditions and in a temperature <br />controlled area above 36 degrees. <br />C. Do not allow product to freeze. Should product freeze, immediately contact the MVRA <br />manufacturer for further instructions. <br />1.8 WARRANTY <br />A. Moisture Vapor Reduction Admixture (MVRA): <br />1. MVRA must be installed according to, and in compliance with, the manufacturer's <br />published data sheet to include, but not limited to: <br />a. Dosing instructions. <br />b. Onsite representation and sampling requirements. <br />c. Use of an ASTM E 1745 vapor retarder installed following ASTM E 1643 <br />and ASTM F710 guidelines; elevated slabs to receive flooring do not <br />require a vapor retarder <br />d. The design and specifications for roof deck assemblies, to include but <br />not limited to, the use of air barriers and/or vapor retarders is the sole <br />responsibility of the design professional and is excluded from this <br />warranty as are any costs incurred due to roofing overburden. <br />2. Manufacturer's Warranty: To include: <br />a. Term: Life of the concrete. <br />b. Repair and/or removal of failed flooring or roofing. <br />c. Placement of a topical moisture remediation system. <br />d. Replacement of flooring/roofing materials like original installed to include <br />material and labor. <br />3. Adhesion Warranty: MVRA Manufacturer shall provide an adhesion warranty to <br />match the term of the adhesive and/or primer manufacturer's material defect <br />warranty upon MVRA manufacturer's acceptance of field bond test. <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A. Basis -of -Design "Barrier One High Performance Moisture Vapor Reduction Admixture" <br />manufactured by Barrier One, Inc..; 522 S. Hunt Club Blvd., #303, Apopka, Florida <br />32703; Contact Manufacturer's representative: P: 877.224.5850, F: 866.594.3490 or <br />Email at: info@barrierone.com <br />B. Products of the following manufacturers are acceptable, providing their products equal or <br />exceed the quality specified and they can provide products of the type, function and <br />testing required. <br />1. 1800 Super Admix; Moxie International <br />2. Vapor Lock 20/20; Specialty Products Group <br />3. Hycrete W1000; Hycrete <br />4. Admix C-2000; Xypex <br />C. Subject to compliance with the requirements of this section, under provisions of Section <br />01 60 00, substitutions may be considered. Failure to provide a product that meets or <br />exceeds the MVRA warranty requirements of Part I and the MVRA field quality control <br />requirements of Part 3 will result in all subsequent testing and slab remediation costs <br />being borne by the ready mix supplier. <br />HIGH PERFORMANCE CONCRETE MOISTURE 030510- 3 <br />VAPOR REDUCING ADMIXTURE <br />