Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />2. Each type of hardware and accessory. <br />E. Product Schedule: For toilet compartments, prepared by or under the supervision of supplier, <br />detailing location and selected colors for toilet compartment material. <br />1.4 INFORMATIONAL SUBMITTALS <br />A. Product Certificates: For each type of toilet compartment. <br />1.5 CLOSEOUT SUBMITTALS <br />A. Maintenance Data: For toilet compaitments to include in maintenance manuals. <br />1.6 MAINTENANCE MATERIAL SUBMITTALS <br />A. Furnish extra materials that match products installed and that are packaged with protective <br />covering for storage and identified with labels describing contents and source. <br />1. Door Hinges: One hinge with associated fasteners. <br />2. Latch and Keeper: One latch and keeper(s) with associated fasteners. <br />3. Door Bumper: One bumper with associated fasteners. <br />4. Door Pull: One door pull with associated fasteners. <br />5. Fasteners: Ten fasteners of each size and type. <br />1.7 PROJECT CONDITIONS <br />A. Field Measurements: Verify actual locations of toilet fixtures, walls, columns, ceilings, and <br />other construction contiguous with toilet compartments by field measurements before <br />fabrication. <br />PART 2 - PRODUCTS <br />2.1 PERFORMANCE REQUIREMENTS <br />A. Surface -Burning Characteristics: Comply with NFPA 286; testing by a qualified testing agency. <br />Identify products with appropriate markings of applicable testing agency. Independent testing <br />might be required. <br />2.2 SOLID -PLASTIC TOILET COMPARTMENTS <br />A. Manufacturers: Subject to compliance with requirements, available manufacturers offering <br />products that may be incorporated into the Work include, but are not limited to, the following: <br />PLASTIC TOILET COMPARTMENTS 10 21 13 - 2 <br />