Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />F. Finished Thickness: <br />1. Stiles and Doors: 3/4 inch (19 mm) <br />a. Finished thickness of doors and stiles to ensure flush front. <br />2. Panels and Screens: 1/2 inch (13 mm). <br />G. Wall Posts: Pre -drilled for door hardware, 18-8, Type 304, 16 gauge (1.6 mm) stainless steel <br />with satin fmish; 1 inch (25 mm) x 1-1/2 inches (38 mm) x 58 inches high (1473 mm). <br />H. Anchors: Expansion shields and threaded rods at floor connections as applicable. Threaded <br />rods secured to supports above ceiling as applicable. Supports above ceiling furnished and <br />installed as Work of Section 055000. <br />I. Hardware: <br />1. Compliance: Operable with one hand, without tight grasping, pinching, or twisting of the <br />wrist, and force to operate does not exceed five pounds. <br />2. Emergency Access: Hinges, latch allow door to be lifted over keeper from outside <br />compartment on inswing doors. <br />3. Materials: 18-8, Type 304, heavy -gauge stainless steel with satin finish. Chrome -plated <br />"Zamak", aluminum, or extruded plastic hardware not acceptable. <br />4. Fastening: Hardware secured to door and stile by through -bolted, theft -resistant, pin -in - <br />head Torx stainless steel machine screws into factory -installed, threaded brass inserts. <br />Fasteners secured directly into core not acceptable. <br />a. Threaded Brass Inserts: Factory -installed; withstand direct pull force exceeding <br />1500 lb (680 kg) per insert. <br />5. Clothes Hooks: Projecting no more than 1-1/8 inch (29 mm) from face of door. <br />6. Hardware Type: Standard, commercial hardware. <br />a. Latching: Track of door latch prevents inswing doors from swinging out beyond <br />stile; on outswing doors, door keeper prevents door from swinging in beyond stile; <br />14 gauge (2 mm) sliding door latch, 11 gauge (3.2 nun) keeper. Twist -style door <br />latch operation not acceptable. <br />b. Hinges: Balanced, with field -adjustable cam to permit door to be fully closed or <br />partially open when compartment is unoccupied. <br />c. Locking: Door locked from inside by sliding door latch into keeper. <br />d. Mounting Brackets: Mounted inside compartment; exposed brackets on exterior of <br />compartment not acceptable with the exception of outswing doors. <br />7. Hardware Type: Institutional Hardware (.67). <br />a. Latching: 14 gauge (2 mm) sliding door latch, 11 gauge (3.2 mm) keeper; latch <br />slides on a shock -resistant nylon track. Twist -style door latch operation not <br />acceptable. <br />b. Hinges: 16 gauge (1.6 mm) stainless steel, self-closing, 3 section hinges. <br />TOILET COMPARTMENTS 102113-4 <br />