Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />3) Rim -Restraining Device: Complying with NCAA and NFHS rules and <br />designed to ensure that basket remains attached if glass backboard breaks. <br />b. Steel: Single -piece, steel face sheet, not less than [0.1046 -inch (2.7 -mm)] nominal <br />thickness, with 1 -1./2 -inch- (38 -mm-) deep, roll -edged perimeter flange and with <br />steel -reinforced, welded frame welded to back side of backboard; with mounting <br />slots for mounting backboard frame to backboard support framing at standard <br />mounting centers. <br />4. Target Area and Border Markings: Permanently etched in white color, marked in <br />manufacturer's standard pattern and stripe width. <br />H. Basketball Goals: Complete with flanges, braces, attachment plate, and evenly spaced loops <br />welded around underside of ring. <br />1. Single -Rim Basket Ring Competition Goal: Materials, dimensions, and fabrication per <br />manufacturer's standard design. <br />2. Breakaway Characteristics: Positive -lock movable breakaway design, with <br />manufacturer's standard breakaway mechanism including preset pressure release, set to <br />release at 180- and 230 -Ib load, and automatic reset. Provide movable ring with rebound <br />characteristics identical to those of fixed, nonmovable ring. <br />3. Field Adjustment: Provide rim that is field -adjustable for rebound elasticity without being <br />removed from the backboard. <br />4. Net Attachment: No -tie loops for attaching net to rim without tying <br />5. Finish: Manufacturer's standardfinish. <br />Basketball Nets: 12 -loop -mesh net, between 1.5 and 18 inches (380 to 460 min) long, sized to fit <br />rim diameter, and as follows: <br />1. Competition Cord: Antiwhip, made from white nylon cord not less than 120 -gm thread <br />and not more than 144 -gm thread. <br />J. Backboard Safety Pads: Designed for backboard thickness indicated and extending continuously <br />along bottom and up sides of backboard and over goal mounting and backboard supports per <br />manufacturer's standard design <br />1. Attachment: Manufacturer's standard. <br />2. Color: As selected by Architect from manufacturer's full range. <br />2.3 VOLLEYBALL EQUIPMENT <br />A. Manufacturers: Subject to compliance with requirementsavailable manufacturers offering <br />products that may be incorporated into the Work include, but are not limited to, the <br />following: <br />1. AALCO Manufacturing <br />2. ADP Lerne°. <br />3. Arizona Courtl nes,[ac. <br />4. Bison Inc. <br />5. Douglas lndustdes, Inc. <br />6. Draper, Inc. <br />GYMNASIUM EQUIPMENT 116623 - 5 <br />