Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />1) Top Line: Not less than [1/4 -inch- (6 -mm-) diameter rope] [1/8 -inch- (3- <br />mm-) diameter, galvanized- or coated -steel cable] <Insert description>. <br />2) Bottom Line: Not less than [1/4 -inch- (6 -mm-) diameter rope] [1/8 -inch - <br />(3 -mm-) diameter, galvanized- or coated -steel cable] <Insert <br />description>. <br />3. Dowels: Not less than 1/2 -inch- (13 -mm;) diameter fiberglass or 1 -inch- (25 -mm-) <br />diameter wood. Provide two dowels per net threaded through each side hem sleeve for <br />straightening net side edges. <br />4. Net Antennas: 3/8 -inch- (9.5 -mm-) diameter, high -tensile -strength, extruded -fiberglass or <br />plastic rods, 72 inches (1800 mm) long, extending above top hem band of net, with <br />alternating white and red bands according to competition rules. Provide two antennas per <br />net. <br />a. Clamps: Designed to secure antenna to top and bottom of net. <br />5. Boundary Tape Markers: 2 -inch- (50 -mm.-) wide white strip[ with sleeve for securing <br />net antenna], secured to net top and bottom with hook -and -loop attachment. Provide two <br />tape markers per net for marking court boundaries. <br />E. Net -Tensioning System: Designed to adjust and hold tension of net. Fully enclosed, nonslip <br />manufacturer's standard -type winch with cable length and fittings for connecting to net lines, <br />positive -release mechanism, manufacturer's standard handle. Provide end post with post top <br />pulley. Provide opposing post with welded -steel loops, hooks, pins, or other devices for net <br />attachment and post top grooved line guide. <br />F. Bottom Net Lock Tightener: Provide manufacturer's standard quick -release -type tension strap; a <br />spring-loaded, self-locking tensioner; a turnbuckle; a pulley; or other device and linkage fittings <br />designed to quickly and easily tighten bottom line or net. <br />G. Safety Pads: Comply with NCAA and NFHS requirements. Provide pads consisting of not <br />less than [1 -inch- (25 -mm-)] [1 -1/4 -inch- (32 -min )] thick, multiple -impact -resistant <br />manufacturer's standard foam filler covered by puncture- and tear -resistant fabric <br />covermanufacturer's standard ; with fire -test -response characteristics indicated. Provide pads <br />with hook -and -loop closure or attachments for the following components: <br />1. Post Standards: Wraparoundstyle, designed to totally enclose each standard to a height <br />of not less 72 inches (1800 mm; one per post. <br />2. Net Lines: Four per net. <br />3. Fabric Color: As selected by Architect from full range of industry standard colors <br />and color densities. <br />H. Post Standard Transporter: Manufacturer's standard wheeled unit designed for transporting a <br />single post. <br />I. Wall Storage Rack: Manufacturer's standard unit designed for mounting on walls and for storing <br />post standards in vertical position with retaining arms, fittings for padlock, and mounting <br />hardware; number of units as required to provide storage for specified equipment. <br />J. Storage Cart: Manufacturer's standard wheeled unit designed for transporting and storing <br />volleyball equipment and passing through 36 -inch- (910 -mm-) wide door openings. Fabricate <br />GYMNASIUM EQUIPMENT 116623 - 7 <br />