Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />PART 2- PRODUCTS <br />2.1 MANUFACTURERS, GENERAL <br />A. Source Limitations: Obtain gymnasium dividers] from single source from single manufacturer. <br />2.2 TOP -ROLL DIVIDER SYSTEMS <br />A. Manufacturers: Subject to compliance with requirements, available manufacturers offering <br />products that may be incorporated into the Work include, but are not limited to, the <br />following: <br />1. AALCO Manufacturing. <br />2. ADP Lemco. <br />3. Draper, Inc. <br />4. Javpro Sports Construction Group. <br />5. Performance Sports Systems: a Cared Holdings company. <br />6. S•aldin" Ec ui.ment. <br />7. <Insert manufacturer's name>. <br />B. Divider Curtain System: Electrically operated, top -roll drive pipe, and as follows: <br />1. Outer Edge Hems: Double tumed[ and welded]. <br />2. Supports and Fittings: Corrosion -resistant steel clamps and hangers. <br />3. Drive Pipe: 3 -1/8 -inch (79 -mm) nominal diameter, fabricate from steel, aluminum, or <br />PVC pipe or tubing with a minimum number of joints, as necessary for required lengths. <br />Steel shall be galvanized or shop primed and shop finished with black paint. <br />4. Curtain Battens: 1 -1/2 -inch (38 -mm) nominal diameter, fabricated from steel pipe or <br />tubing with a minimum number of joints, as necessary for required lengths. Provide <br />galvanized steel, or shop prime and shop finish with black paint. <br />2.3 MATERIALS <br />A. Support Chain and Fittings: For chains used for overhead lifting, provide Grade 80 heat-treated <br />alloy steel chains, complying with ASTM A 391/A 391M, with commercial -quality, [hot -dip <br />galvanized] [or] [zinc -plated] steel connectors and hangers. <br />B. General -Purpose Chain: For chains not used for overhead lifting, provide carbon steel chain, <br />complying with ASTM A 413/A 413M, Grade 30 proof coil chain or other grade recommended <br />by gymnasium divider manufacturer. Provide coating type, chain size, number, and installation <br />method complying with manufacturer's written instructions. <br />C. Anchors, Fasteners, Fittings, and Hardware: Manufacturer's standard corrosion -resistant or <br />noncorrodible units; concealed[; tamperproof, vandal -resistant design]. <br />GYMNASIUM DIVIDERS 116653 - 3 <br />