Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />2.5 GENERAL FINISH REQUIREMENTS <br />A. Appearance of Finished Work: Noticeable variations in same piece are not acceptable. <br />Variations in appearance of adjoining components are acceptable if they are within the range of <br />approved Samples and are assembled or installed to minimize contrast. <br />2.6 ALUMINUM FINISHES <br />A. Baked -Enamel, Powder -Coat Finish: Manufacturer's standard, baked, polyester, powder -coat <br />finish complying with finish manufacturer's written instructions for surface preparation, <br />including pretreatment, application, baking, and minimum dry film thickness. <br />2.7 STEEL AND GALVANIZED -STEEL FINISHES <br />A. Baked -Enamel, Powder -Coat Finish: Manufacturer's standard, baked, polyester, powder -coat <br />finish complying with fmish manufacturer's written instructions for surface preparation, <br />including pretreatment, application, baking, and minimum dry film thickness. <br />B. PVC Finish: Manufacturer's standard, UV -light stabilized, mold -resistant, slip -resistant, matte - <br />textured, dipped or sprayed -on, PVC-plastisol finish, with flame retardant added; complying <br />with coating manufacturer's written instructions for pretreatment, application, and minimum dry <br />film thickness. <br />2.8 IRON FINISHES <br />A. Baked -Enamel, Powder -Coat Finish: Manufacturer's standard, baked, polyester, powder -coat <br />fmish complying with finish manufacturer's written instructions for surface preparation, <br />including pretreatment, application, baking, and minimum dry film thickness. <br />2.9 STAINLESS-STEEL FINISHES <br />A. Surface Preparation: Remove tool and die marks and stretch lines, or blend into fmish. <br />B. Polished Finishes: Grind and polish surfaces to produce uniform finish, free of cross scratches. <br />1. Run directional finishes with long dimension of each piece. <br />2. Directional Satin Finish: No 4. <br />3. Dull Satin Finish: No. 6. <br />2.10 CAST STONE (CONCRETE) FINISHES <br />A. Formwork: Fabricate forms sufficiently rigid to meet casting tolerances. Coat formwork with <br />form release agent. <br />B. Casting: Fabricate units to required profiles and sizes. Execute work accurately to specified <br />tolerances and free of broken edges. <br />SITE FURNISHINGS 12 93 00 - 6 <br />