Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />insulation and jacket materials and adhesive, mastic, tapes, and cement material containers, <br />with appropriate markings of applicable testing and inspecting agency. <br />1. Insulation Installed Indoors: Flame -spread index of 25 or less, and smoke -developed <br />index of 50 or less. <br />1.5 DELIVERY, STORAGE, AND HANDLING <br />A. Packaging: Insulation material containers shall be marked by manufacturer with appropriate <br />ASTM standard designation, type and grade, and maximum use temperature. <br />1.6 COORDINATION <br />A. Coordinate size and location of supports, hangers, and insulation shields specified in <br />Division 22 Section "Hangers and Supports for Plumbing Piping and Equipment." <br />B. Coordinate clearance requirements with piping Installer for piping insulation application and <br />equipment Installer for equipment insulation application. Before preparing piping Shop <br />Drawings, establish and maintain clearance requirements for installation of insulation and field- <br />appliedjackets and finishes and for space required for maintenance. <br />C. Coordinate installation and testing of heat tracing. <br />1.7 SCHEDULING <br />A. Schedule insulation application after pressure testing systems and, where required, after <br />installing and testing heat tracing. Insulation application may begin on segments that have <br />satisfactory test results. <br />B. Complete installation and concealment of plastic materials as rapidly as possible in each area of <br />construction. <br />PART 2 - PRODUCTS <br />2.1 INSULATION MATERIALS <br />A. Comply with requirements in Part 3 schedule articles for where insulating materials shall be <br />applied. <br />B. Products shall not contain asbestos, lead, mercury, or mercury compounds. <br />C. Flexible Elastomeric: Closed -cell, sponge- or expanded -rubber materials. Comply with <br />ASTM C 534, Type 1 for tubular materials and Type II for sheet materials. <br />Products: Subject to compliance with requirements, provide one of the following: <br />a. Aeroflex USA Inc.; Aerocel. <br />b. Armacell LLC; AP Armaflex. <br />c. RBX Corporation; Insul-Sheet 1800 and Insul-Tube 180. <br />PLUMBING INSULATION 220700 - 2 <br />