Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />3. Fire- and water-resistant, flexible, elastomeric sealant. <br />4. Service Temperature Range: Minus 40 to plus 250 deg F. <br />5. Color: White. <br />2.7 FACTORY -APPLIED JACKETS <br />A. Insulation system schedules indicate factory -applied jackets on various applications. When <br />factory -applied jackets are indicated, comply with the following: <br />1. ASJ: White, kraft -paper, fiberglass -reinforced scrim with aluminum -foil backing; <br />complying with ASTM C 1136, Type I. <br />2.8 TAPES <br />ASJ Tape: White vapor -retarder tape matching factory -applied jacket with acrylic adhesive, <br />complying with ASTM C 1136. <br />1. Products: Subject to compliance with requirements, provide one of the following: <br />a. Avery Dennison Corporation, Specialty Tapes Division; Fasson 0835. <br />b. Compac Corp.; 104 and 105. <br />c. Ideal Tape Co., Inc., an American Biltrite Company; 428 AWF ASJ. <br />2. Width: 3 inches. <br />3. Thickness: 11.5 mils. <br />4. Adhesion: 90 ounces force/inch in width. <br />5. Elongation: 2 percent. <br />6. Tensile Strength: 40 Ibf/inch in width. <br />7. ASJ Tape Disks and Squares: Precut disks or squares of ASJ tape. <br />2.9 CORNER ANGLES <br />A. PVC Corner Angles: 30 mils thick, minimum 1 by 1 inch, PVC according to ASTM D 1784, <br />Class 16354-C. White or color -coded to match adjacent surface. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine substrates and conditions for compliance with requirements for installation and other <br />conditions affecting performance of insulation application. <br />Verify that systems and equipment to be insulated have been tested and are free of <br />defects. <br />Verify that surfaces to be insulated are clean and dry. <br />Proceed with installation only after unsatisfactory conditions have been corrected. <br />PLUMBING INSULATION 220700 - 5 <br />