Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />3. Body: Brass or bronze. <br />4. Size: Same as connected piping, but not larger than NPS 2. <br />B. Accessories: Meter hoses, fittings, valves, differential pressure meter, and carrying case. <br />2.6 TEMPERATURE -ACTUATED, WATER MIXING VALVES <br />A. Primary, Thermostatic, Water Mixing Valves: <br />1. Basis -of -Design Product: Subject to compliance with requirements, provide product <br />indicated on Drawings or comparable product by one of the following: <br />a. Armstrong International, Inc. <br />b. Leonard Valve Company. <br />c. Powers; a division of Watts Water Technologies, Inc. <br />2. Standard: ASSE 1017. <br />3. Pressure Rating: 125 psig minimum unless otherwise indicated. <br />4. Type: Exposed -mounted, thermostatically controlled, water mixing valve. <br />5. Material: Bronze body with corrosion -resistant interior components. <br />6. Connections: Threaded union inlets and outlet. <br />7. Accessories: Manual temperature control, check stops on hot- and cold -water supplies, <br />and adjustable, temperature -control handle. <br />B. Individual -Fixture, Water Tempering: <br />1. Basis -of -Design Product: Subject to compliance with requirements, provide product <br />indicated on Drawings or comparable product by one of the following: <br />a. Leonard Valve Company. <br />b. Powers; a division of Watts Water Technologies, Inc. <br />c. Watts; a division of Watts Water Technologies, Inc.; Watts Regulator Company. <br />2. Standard: ASSE 1016, thermostatically controlled, water tempering valve. <br />3. Pressure Rating: 125 psig minimum unless otherwise indicated. <br />4. Body: Bronze body with corrosion -resistant interior components. <br />5. Temperature Control: Adjustable. <br />6. Inlets and Outlet: Threaded. <br />7. Finish: Rough or chrome -plated bronze. <br />2.7 STRAINERS FOR DOMESTIC WATER PIPING <br />A. Y -Pattern Strainers: <br />1. Pressure Rating: 125 psig minimum unless otherwise indicated. <br />2. Body: Bronze for NPS 2 and smaller; cast iron with interior lining that complies with <br />AWWA C550 or that is FDA approved, epoxy coated and for NPS 2-1/2 and larger. <br />3. End Connections: Threaded for NPS 2 and smaller; flanged for NPS 2-1/2 and larger. <br />4. Screen: Stainless steel with round perforations unless otherwise indicated. <br />5. Perforation Size: <br />a. Strainers NPS 2-1/2 to NPS 4: 0.045 inch <br />DOMESTIC WATER PIPING SPECIALTIES 221119 - 3 <br />