Laserfiche WebLink
INDIAN RIVER COUNTY <br />JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />1. Warranty does not include deterioration or failure of carpet tile due to unusual traffic, <br />failure of substrate, vandalism, or abuse. <br />2. Failures include, but are not limited to, more than 10 percent edge raveling, snags, runs, <br />dimensional stability, excess static discharge, loss of tuft bind strength, loss of face fiber, <br />abrasive wear and delamination. <br />3. Warranty Period: Lifetime from date of Substantial Completion. <br />PART 2 -PRODUCTS <br />2.l TILE CARPETING <br />A. Products and Manufacturers: Refer to Material List Sheet A1.02.20, Basis of Desi en: <br />Sub'ect to compliance with reuirements, provide Products and Manufacturers as listed in the <br />Material List. or comparable products from an approved manufacturer. <br />2.2 PERFORMANCE REQUIREMENTS <br />A. CPT -1, CPT -2, CPT -3, CPT -4: <br />1. Fiber Content: Eco Solution q Nylon, 62% solution dyed / 38% yam dyed. <br />2. Pile Characteristic: Multi -Level Pattern Loop pile. <br />3. Density: 6990 oz./cu. yd. <br />4. Pile Thickness: 0.103. <br />5. Stitches: 9.0 <br />6. Gage: 1/12 <br />7. Tufted Yarn Weight: 20 oz./sq. yd.. <br />8. Backing System: Synthetic EcoWorx Tile <br />9. Size: 24.9" h x 28.8" dia x 14.4" side <br />10. Applied Soil -Resistance Treatment: SSP Shaw Soil Protection <br />11. Antimicrobial Treatment: Manufacturer's standard material <br />12. Performance Characteristics: As follows: <br />a. Appearance Retention Rating: Heavy traffic, 3.0 minimum according to ASTM D <br />7330. <br />b. Critical Radiant Flux Classification: Not less than 0.45 W/sq. cm. <br />c. Dry Breaking Strength: Not less than 100 Ibf according to ASTM D 2646. <br />d. Delamination: Not less than 4 lbf/in. according to ASTM D 3936. <br />e. Dimensional Tolerance: Within 1/32 inch of specified size dimensions, as <br />determined by physical measurement. <br />f. Dimensional Stability: 0.2 percent or less according to ISO 2551 (Aachen Test). <br />g. Resistance to Insects: Comply with AATCC 24. <br />h. Colorfastness to Crocking: Not less than 4, wet and dry, according to AA'TCC 165. <br />i. Colorfastness to Light: Not less than 4 after 60 AFU (AATCC fading units) <br />according to AATCC 16, Option E. <br />j. Antimicrobial Activity: Not less than 2 -mm halo of inhibition for gram -positive <br />bacteria, not less than 1 -mm halo of inhibition for gram-negative bacteria, and no <br />fungal growth, according to AATCC 174. <br />k. Electrostatic Propensity: Less than 3.5kV according to AATCC 134. <br />TILE CARPETING 096183-3 <br />