Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />D. Markerboard Panel: [Porcelain -enamel -faced] <br />faced] markerboard panel on core indicated. <br />1. Color: White . <br />E. Aluminum Frames and Trim: Fabricated from not less than 0.062 -inch- (1.57 -mm-) thick, <br />extruded aluminum; standard size and shape . <br />[High-pressure laminate -faced] [Melamine - <br />1. Field -Applied Trim: Manufacturer's standard, snap -on trim with no visible screws or <br />exposed jointsslip-on trim. <br />2. Aluminum Finish: Clear anodic finish. <br />F. Chalktray: Manufacturer's standard; continuous. <br />1. Box Type: Extruded aluminum with slanted front, grooved tray, and cast -aluminum end <br />closures. <br />2. Solid Type: Extruded aluminum with ribbed section and smoothly curved exposed ends. <br />G. Display Rail: Manufacturer's standard, extruded -aluminum display rail with plastic - <br />impregnated -cork insert, end stops, and continuous paper holder, designed to hold <br />accessories. <br />1. Size: [1 inch (25 mm)] [2 inches (50 mm)] [3 inches (75 rnm)] high by [full length of <br />visual display unit] [length indicated on Drawings]. <br />2. <br />2.4 GENERAL FINISH REQUIREMENTS <br />A. Comply with NAAMM's "Metal Finishes Manual for Architectural and Metal Products" for <br />recommendations for applying and designating finishes. <br />B. Protect mechanical fmishes on exposed surfaces from damage by applying a strippable, <br />temporary protective covering before shipping. <br />C. Appearance of Finished Work: Noticeable variations in same piece are unacceptable. Variations <br />in appearance of adjoining components are acceptable if they are within the range of approved <br />Samples and are assembled or installed to minimize contrast. <br />2.5 <br />A. <br />B. <br />C. <br />ALUMINUM FINISHES <br />Clear Anodic Finish: AAMA 611, AA-M12C22A31, Class II, 0.010 mm or thicker. <br />Color Anodic Finish: AAMA 611, AA-M12C22A32/A34, Class II, 0.010 mm or thicker. <br />Baked -Enamel or Powder -Coat Finish: AAMA 2603, except with a minimum dry film thickness <br />of 1.5 mils (0.04 mm). Comply with coating manufacturer's written instructions for cleaning, <br />conversion coating, and applying and baking finish. <br />VISUAL DISPLAY UNITS 101100 - 4 <br />