Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER100% CONSTRUCTION DOCUMENTS <br />D. Samples for Verification: For each type of sign assembly showing all components and with the <br />required finish(es), in manufacturer's standard size unless otherwise indicated and as follows: <br />1. Panel Signs• Not less than 12 inches (300 mm) square, including corner. <br />2. Exposed Accessories: Full-size Sampleof each accessory type. <br />E. Sign Schedule: Use same designations specified or indicated on Drawings or in a sign schedule. <br />F. Delegated -Design Submittal: <br />1. Include structural analysis calculations for signs indicated to comply with design loads; <br />signed and sealed by the qualified professional engineer responsible for their preparation. <br />1.6 INFORMATIONAL SUBMITTALS <br />A. Qualification Data: For Installerandmanufaeturer. <br />B. Sample Warranty: For special warranty. <br />1.7 CLOSEOUT SUBMITTALS <br />A. Maintenance Data: For signs to include in maintenance manuals. <br />1.8 QUALITY ASSURANCE <br />A. Installer Qualifications: An entity that employs installers and supervisors who are trained <br />and approved by manufacturer. <br />1.9 FIELD CONDITIONS <br />A. Field Measurements: Verify locations of anchorage devices andelectrical service embedded in <br />permanent construction by other installers by field measurements before fabrication, and <br />indicate measurements on Shop Drawings. <br />1.10 WARRANTY <br />A. Special Warranty: Manufacturer agrees to repair or replace components of signs that fail in <br />materials or workmanship within specified warranty period. <br />1. Failures include, but are not limited to, the following: <br />a. Deterioration of finishes beyond normal weathering. <br />b. Deterioration of embedded graphic image. <br />c. Separation or delamination of sheet materials and components. <br />2. Warranty Period: Five years from date of Substantial Completion. <br />PANEL SIGNAGE 101423 - 2 <br />