Laserfiche WebLink
ADDENDUM NO. 3 11/5/2014 <br />SECTION 00006 — AS-BUILT/RECORD DRAWINGS <br />GENERAL <br />Maintain, prepare and provide the ENGINEER with record documents as specified below, <br />except where otherwise specified or modified within the scope of work provided in the <br />specific project contract documents. The Contractor and/or Developer shall be responsible <br />for, and required to provide, Record Drawings as outlined in this section. <br />MAINTENANCE OF RECORD DOCUMENTS: <br />1. Maintain in CONTRACTOR's field office in clean, dry, legible condition <br />complete sets of the following project documents: Drawings, Specifications, <br />Addenda, approved Shop Drawings, samples, photographs, Change Orders, <br />other modifications of Contract Documents, test records, survey data, Field <br />Orders, and all other documents pertinent to CONTRACTOR'S Work. <br />2. Provide files and racks for proper storage and easy access. <br />3. Make documents available at all times for inspection by ENGINEER and <br />OWNER. <br />4. Do not use record documents for any other purpose and do not remove them <br />from the field office. <br />5. Label each document "RECORD DRAWING" in 2 -inch high printed letters. <br />6. Keep record documents current at all times. <br />7. No work shall be permanently concealed until the required record data has <br />been obtained. <br />AS-BUILT/RECORD DRAWINGS <br />A. During the construction operation, the CONTRACTOR shall maintain records of all <br />deviations from the approved Project Plans and Specifications and shall prepare <br />therefrom "RECORD" drawings showing correctly and accurately all changes and <br />deviations from the work made during construction to reflect the work as it was actually <br />constructed. <br />B. The Record/As-Built survey shall be performed and subsequent plans prepared by a <br />Professional Surveyor and Mapper, registered in the state of Florida and certified to <br />the standards set forth in Chapter 472, Florida Statutes and Chapter 5J-17.050 Florida <br />Administrative Code (Florida Minimum Technical Standards). <br />C. Field measurements of vertical or horizontal dimensions of constructed improvements <br />shall be obtained so that the constructed facility can be delineated in such a way that <br />the location of the construction may be compared with the construction plans. Clearly <br />shown by symbols, notations, or delineations, those constructed improvements located <br />by the survey. <br />D. All vertical information (elevations) provided on the Record Drawings shall be <br />referenced to the Northern American Vertical Datum of 1988 (NAVD 88) unless <br />otherwise specified by the Project Engineer. <br />01025-13 <br />F:1Public Works\ENGINEERING DIVISION PROJECTS11135-S County Park Intergeneratiional Rec <br />Facility\Admim'ADDENDUMS\Technicai Specs (SITE) -Addendum No. 3 11-5-2014.doc <br />Technical Specifications <br />