2012-020 - Laserfiche WebLink

Home Browse Search

ORDINANCE 2012-020 (number of allowable dwelling units) x (2.5 residents per dwelling unit) x 1.5 = maximum number of residents allowed b. Regarding multi -family and commercial zoning districts: (number of allowable dwelling units) x (2 residents per dwelling unit) x 1.5 = maximum number of residents allowed. In no case shall the maximum number of residents allowed on a project site exceed the average maximum number of residents allowed (as calculated by the above formula) on adjacent sites bordering the project site. Averaging for adjacent sites shall be based upon length of the common border between the project site and the adjacent site. 3. To avoid unsafe or unhealthy conditions that may be produced by the overcrowding of persons living in these facilities, a minimum floor area per person shall be required. Floor area requirements shall be measured from interior walls of all rooms including closet space. a. Total interior living space. A minimum of two hundred (200) square feet of interior living space shall be provided per facility resident. Interior living space shall include sleeping space and all other interior space accessible on a regular basis to all facility residents. b. Minimum sleeping areas. A minimum of eighty (80) square feet shall be provided in each sleeping space for single occupancy. A minimum of sixty (60) square feet of sleeping space shall be provided for each bed in a sleeping space for multiple occupancy. C. Bathroom facilities. A full bathroom with toilet, sink and tub or shower shall be provided for each five (5) residents. 4. To avoid an undue concentration of group care facilities within residential neighborhoods, all such facilities within residential zoning districts shall be located at least one thousand two hundred (1,200) feet apart, measured from property line to property line, unless exempted as follows. The separation distance requirement and measurement shall not apply to group home or ACLF uses involving twenty-one (21) or more residents, where such uses are located on major arterial roadways. 5. If located in a single-family area, the home shall have the appearance of a single-family home. Structural alterations or designs shall be of such a nature as to preserve the residential character of the building. 6. If located in the AIR -1 zoning district, the site shall have an L-1 land use designation. Bold Underline: Additions to Ordinance 13 Strike-thFou& Deleted Text from Existing Ordinance C:\Documents and Settings\tlister\Local Settings\Temporary Internet Files\Content.Outlook\QPAZMTU8\2012-020 971 Spec Land Uses.doc