2012-023 - Laserfiche WebLink

Home Browse Search

ORDINANCE 2012-023 permits, and all utility permits and franchises required by the Indian River County utility division prior to the issuance of a land development permit. All construction plans and specifications must be prepared, signed and sealed by a professional engineer who is registered in the State of Florida. Engineering calculations and tests in support of any of the proposed plans and specifications may be required. The drawings and required information shall be so complete that review and analysis can be made from them without research of any outside data. Five (5) copies of the plans shall be submitted on twenty -four -inch -by - thirty -six-inch sheets unless another size is approved by the county public works director, and shall contain, but shall not be limited to: 1. A cover sheet, including a location map; 2. Complete details including water, sewer, and storm drainage system. The proposed general location of wells and septic tanks shall be in conformity with the requirements of the Indian River County health department and all state and local ordinances; 3. A master stormwater management and flood protection plan and complete calculations and exhibits as required by Chapter 930; 4. Construction details showing compliance with county standards or alternate design as approved by the county public works director; 5. Special profile sheets, if necessary, showing special or unique situations; 6. Benchmark location, based on National r, a *' Veftieal Data North American Vertical Datum 1988 (NAVD88); 7. Soil analysis, showing the locations and results of test borings of the subsurface condition of the tract to be developed, when required by the public works director. Soil conservation service information may be used when available. Where impervious soils or muck are encountered, the plans shall reflect a satisfactory design to cope with such conditions; The plans shall contain the special conditions and specifications pertaining to the subdivision in note form on the plans, such as: a. Required compliance to the subdivision requirements; b. Where applicable, required compliance with state standards as currently adopted and in use; C. Minimum standards for materials; d. Test requirements for stabilization, base and backfill; Bold Underline: Additions to Ordinance 2 Strike Hxeagh:: Deleted Text from Existing Ordinance C:\Documents and Settings\tlister\Local Settings\Temporary Internet Files\Content.Outlook\QPAZMTU8\2012-023 NVGD to NAVD(901913914930).doc