2012-016 - Laserfiche WebLink

Home Browse Search

ORDINANCE 2012-016 Maximum lot coverage % of lot 20 10 30 30 Minimum open sace % of lot 80 80 50 40 'Size and Dimension Criteria for AG -3 are the same as AG -2; the only difference is in the maximum density and minimum lot size. Maximum density for AG -3 is 1 unit/20 acres, and minimum lot size is 870,000 sq. ft. 2Air-1 is allowed only within areas where airstrips existed prior to February 13, 1990. *Note: A one -foot additional setback is required for every one (1) foot in building height over twenty-five (25) feet in building height. For example, a building or portion of a building that has a thirty -five-foot building height, as defined in the land development regulations, must have an additional ten -foot setback from any adjacent front, side, or rear property line to that portion of the building that exceeds twenty-five (25) feet in building height. Maximum FAR (Floor Area Ratio): • Retail trade 0.23 FAR • Office, business/personal services, recreational, schools, institutional 0.35 FAR • Industrial, storage, wholesale/distribution, utilities, heavy repair 0.50 FAR SECTION #8: Amend LDR Section 911.10(8), Required buffer yards, to read as follows: (8) Required buffer yards: Buffer yards are required along rear/side property lines and measured at right angles to lot lines. All screening and buffering requirements shall meet the standards established in section 926, Landscaping and buffering. No parking or loading shall be permitted within buffer yards. When a loading dock is proposed to serve a use that normally requires frequent deek use deliveries (e.g. grocery store, department store, big box retail), and when the loading dock is to be located adjacent to a residentially designated site, and when the loading dock will not be screened from view from an adjacent residential site by an intervening building or structure, and eight -ice foot high wall shall be required between the loading dock and the residential site. Wall height shall be measured from the grade elevation of the parking area adjacent to the loading dock. Plantings along the wall are required in accordance with the standards of landscape section 926.08. Bold Underline: Additions to Ordinance 32 StfikO t#Feu& Deleted Text from Existing Ordinance C:\Documents and Settings\tlister\Local Settings\Temporary Internet Files\Content.Outlook\QPAZMTU8\2012-016 911 and 912.doc Abutting Use/District District Single -Family Buffer Type Multi -Family Buffer Type PRO C- 6 ft. Opaque D C- 3 ft. Opaque OCR C- 6 ft. Opaque D C- 3 ft. Opaque MED C-6ft. Opaque D ft. Opaque CN B-6ft. Opaque C-6ft. Opaque CL B-6ft. Opaque C-6ft. Opaque CG B-6ft. Opaque C-6ft. Opaque CH B-6ft. Opaque B-6ft. Opaque Buffer yards are required along rear/side property lines and measured at right angles to lot lines. All screening and buffering requirements shall meet the standards established in section 926, Landscaping and buffering. No parking or loading shall be permitted within buffer yards. When a loading dock is proposed to serve a use that normally requires frequent deek use deliveries (e.g. grocery store, department store, big box retail), and when the loading dock is to be located adjacent to a residentially designated site, and when the loading dock will not be screened from view from an adjacent residential site by an intervening building or structure, and eight -ice foot high wall shall be required between the loading dock and the residential site. Wall height shall be measured from the grade elevation of the parking area adjacent to the loading dock. Plantings along the wall are required in accordance with the standards of landscape section 926.08. Bold Underline: Additions to Ordinance 32 StfikO t#Feu& Deleted Text from Existing Ordinance C:\Documents and Settings\tlister\Local Settings\Temporary Internet Files\Content.Outlook\QPAZMTU8\2012-016 911 and 912.doc