Laserfiche WebLink
West j<1or!da. M Ina <br />253 Aioh4w Drwe. <br />Pat"wtW; FL 34221 <br />W es#torida l @O*UL& co»v <br />813-843-0041 <br />South Countv WWTF Paintina Pr000sal <br />During extensive walk through and site inspection, prior to start date, with Jim Degraffenreid and Richard <br />Meckes, the following was observed throughout many areas of the WWTF and discussed. <br />With regard to the following structures. <br />- Exterior Tank Pipes <br />- Steel Support brackets, holding tank pipes, and motors <br />- Numerous connections around pipes and supports <br />- Walkways <br />Extensive rust and pitted areas These areas will not satisfactorily respond to wire brush and/or <br />pressure washing. Rust will seep through connections and into the pipes and supports within weeks. <br />Heavy mil scale is also apparent on all exterior tank pipes, steel supports around connections and <br />walkways. <br />Proposal <br />In order to achieve the purpose of this project and secure a 5 year warranty by the paint manufacture, the <br />following is proposed. <br />Commercial Blast — SSP10 Near White (Commercial Blast areas will be tented and tarped as necessary <br />to capture the blast media and reduce dust) <br />First Application - Sherwin-Williams MacroPoxy 920 — Pre Prime. 1.5-2.0 dry mills VOC compliant, <br />penetrating epoxy primer designed for the use over properly prepared steel or concrete services. <br />Second Application - Sherwin-Williams MacroPoxy 646 — Fast Cure Epoxy 5.0-10.0 dry mills High <br />solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial <br />exposures. The high solids content ensures adequate protection of sharp edges, comers, and welds. <br />Third Application - Acrolon 218 HS 3.0-6.0 dry mills Polyester modified, aliphatic, acrylic <br />polyurethane suitable for industrial applications. A fast drying, urethane that provides color and gloss <br />retention for exterior exposure. Specifically formulated for use over prepared metal in industrial <br />environments, such as structural steel and pipelines. <br />Given my 41+ years of experience as an industrial coatings engineer, it is my professional <br />recommendation that in order to complete this project up to the highest standards and workmanship, as <br />well as customer satisfaction and warranty, this method is in the best interest or Indian River. <br />Total cost - $9,750.00 <br />Prepared by: <br />Fra*Ak Sa*xrok, Prep4e4 w <br />37 <br />