Laserfiche WebLink
Sr <br />i'^ Ardaman & Associates, Inc. <br />um&Geotechnical, Environmental and <br />Materials Consultants <br />EXHIBIT "A" <br />ARDAMAN & ASSOCIATES, INC. <br />FEE SCHEDULE <br />INDIAN RIVER COUNTY <br />GEOTECHNICAL AND ENVIRONMENTAL ENGINEERING <br />AND CONSTRUCTION MATERIALS TESTING SERVICES <br />(October 1, 2014 through September 30, 2016) <br />CONCRETE SAMPLING AND TESTING <br />Cylinder samples (up to 4 cylinders per set): molding <br />curing, and strength testing (ASTM C-31 and C-39). <br />Cylinders shall be left in a place provided by the <br />Contractor, covered with plastic caps and attempts <br />made to provide shade thereon. If temperature of <br />the air is critical to first 24 hours (during field curing), <br />equipment to maintain such controls shall be provided <br />by others. <br />Additional cylinders <br />Engineering technician time due to construction delays and time <br />transporting cylinders from site to office <br />if no other work is required <br />Curing and strength testing samples delivered to our <br />laboratory (ASTM C-39) <br />Continuous monitoring of concrete placement and/or <br />extra slump and temperature tests, engineering technician time <br />Slump tests (ASTM C-143) <br />Air Entrainment (ASTM C-173) <br />Unit weight <br />Yield tests <br />Verification of mix design <br />Fineness modules <br />Plant control <br />Concrete blocks. Strength tests (determined by gross area) <br />Concrete blocks. Absorption and strength tests (net area) <br />Block Prism Assembly <br />Flexural Strength Beams (up to 3 beams) $30.00 each additional beam <br />Test beams made by others <br />Grout Prisms 3/set (blocks supplied by others) <br />Marsh Funnel Viscosity <br />SAMPLING AND TESTING OF IN-PLACE CONCRETE/SOIL CEMENT <br />Coring and testing of cored samples: <br />Engineering technician time (two technicians may be required) <br />Mobilization of coring equipment <br />With power supplied <br />Without power supplied <br />Trimming, capping and strength test (ASTM C-42) <br />Depth measurement <br />Swiss Hammer <br />Mobilization of equipment <br />Technician time <br />$80.00/set <br />$15.00/cylinder <br />$45.00/hour <br />$15.00/cylinder <br />$45.00/hour <br />$15.00/test <br />$30.00/test <br />$35.00/test <br />$35.00/test <br />$225.00/each <br />$44.00/each <br />$65.00/hour <br />$30.00/block <br />$125.00/set of 3 <br />$220.00/set of 3 <br />$150.00/set of 3 <br />$50.00/each <br />$80.00/set <br />$35.00/test <br />$45.00/hour <br />$150.00/trip <br />$100.00/trip <br />$30.00/core <br />$15.00/core <br />$50.00/trip <br />$52.00/hour <br />460 NW Concourse Place, Unit 1 Port St. Lucie, Florida 34986 772-878-0072 (office) 772-878-0097 (fax) Page 2 of 8 <br />51 <br />