Laserfiche WebLink
SECTION 9 <br /> RECLAIMED WATER MAINS <br /> POLYVINYL CHLORIDE PIPE <br /> 9.01 SCOPE <br /> This section covers polyvinyl chloride pipe and fittings for reclaimed water <br /> mains. <br /> 9.02 GENERAL <br /> A. Polyvinyl chloride (PVC) pipe shall be allowed for use as reclaimed <br /> water pipe where compatible with the specific conditions of the <br /> project. Indian River County Department of Utility Services (IRCDUS) <br /> may require the use of material, other than polyvinyl chloride, during <br /> construction permit review or by IRCDUS field personnel during <br /> construction if it is determined that polyvinyl chloride pipe is unsuitable <br /> for the particular application. <br /> B. The pipe used for wastewater shall be purple in color. <br /> 9.03 PIPE MATERIALS FOR SIZES 4" THROUGH 12" <br /> A. All pipe and fittings intended for conveying or transmitting wastewater <br /> shall be designed for a minimum working pressure of 150 psi. <br /> B. Polyvinyl chloride pressure pipe shall conform to AWWA Standards <br /> Specifications C900 latest revision, or C909, latest revision and ASTM <br /> D1784 and D2241, latest revision. PVC pressure pipe shall be made <br /> from Class 12454-A or Class 12454-B material and conform to the <br /> outside diameter of cast iron pipe. <br /> C. Polyvinyl chloride pressure pipe less than 4" diameter shall be DR-21, <br /> PR-200 <br /> D. Polyvinyl chloride pipe shall be purchased in accordance with <br /> IRCDUS Approved Manufacturer's Product List. <br /> 9.04 PIPE MATERIALS FOR SIZES 14" THROUGH 36" <br /> A. All pipe and fittings intended for conveying or transmitting <br /> wastewater shall be designed for a minimum working pressure of <br /> 150 psi. <br /> B. Polyvinyl chloride pressure pipe shall conform to the latest AWWA <br /> Standards Specifications C905-97 and ASTM D1784, latest <br /> revisions. PVC pressure pipe shall be made from Class 12454-A <br /> or Class 12454B material and conform to the outside diameter of <br /> cast iron pipe with a minimum wall thickness of DR18. <br /> 9 - 1 <br />