Laserfiche WebLink
2) Shop Primer: 90-97 & H90-97 — 1 or 2 coats zinc-rich <br /> LW "lead free" primer 2.5-3.5 dry mils per coat. <br /> 3) Shop Primer or Field Touch-Up (Top Coat): 66-1211 <br /> Epoxy - 1 coat, 3.0-5.0 dry miles per coat. <br /> 4) Shop Finish or Field Touch-Up (Top Coat): 66 H.B. <br /> Epoxoline - 2 coats, 3.0-4.0 dry mils per coat. <br /> 5) Shop Finish (Top Coat): Endura-Shield II 1074 & 1074U 2 <br /> coats 2 to 5 dry mils. <br /> b. KOP-COAT: <br /> 1) Shop Primer: <br /> a) Ferrous Metals: 340 Gold Epoxy— <br /> coat, 1.5-2.0 dry mils per coat. <br /> b) Nonferrous and Galvanized: None. <br /> 2) Intermediate: Hi-Gard - 1 coat, 4.0-5.0 dry mils. <br /> 3) Shop Finish or Field Touch-Up: 1122BRS Polyester <br /> Polyurethane - 1 coat, 1.5-2.5 dry mils per coat, 360-540 <br /> square feet per gallon. <br /> C. MAB Paint: <br /> 1) Shop Primer: Ply-Tile 520-W-45 - 1 coat, 2.0-3.0 dry mils <br /> per coat. <br /> 2) Field Primer or Touch-up (Top Coat): Ply-Tile 520-W-45 - 1 <br /> coat, 2.0-3.0 dry mils per coat <br /> 3) Shop Finish or Field Touch-Up (Top Coat): Series 031 <br /> Ply-Tile 520 HB Epoxy - 2 coats, 6.0-8.0 dry mils per coat. <br /> d. Or approved equal. <br /> 3. Color of Pipe Lines: <br /> a. All pipelines and equipment shall be painted in conformity with the <br /> requirements of this section. The color of the final coats of paint shall be <br /> color-coded. <br /> b. General Color Code: Unless otherwise specified, the following <br /> color code should be used: <br /> 12-4 <br />