Laserfiche WebLink
a. Materials <br /> ICW <br /> All paints and painting materials shall be high-grade products <br /> of manufacturers of established reputation and shall be <br /> "Approved"for the intended use. <br /> To ensure a satisfactory end product, it is essential that paint <br /> coats be mutually compatible; both shop and field <br /> applications. To this end, insofar as possible, all paints <br /> applied to a given surface shall be the product of a single <br /> manufacturer. <br /> The paint material set forth in Subsection B.3.4, "Paint <br /> Schedule," shall be the minimum acceptable type for the <br /> application indicated. <br /> b. Application <br /> The Builder shall do a complete painting job throughout the <br /> project in accordance with generally approved modern <br /> practice for work of high quality. Additionally, surface <br /> preparation and application shall be in strict compliance with <br /> the manufacturer's recommendations, and paint shall not be <br /> extended or modified. <br /> Factory finish coatings shall be inspected following installation <br /> and any mars or blemishes shall be touched up in the field <br /> with the original color and type of paint. <br /> C. Painting Requirements <br /> Table I, "Paint Schedule," attached hereto, specifies in <br /> general the surfaces to be painted; service conditions for the <br /> indicated surfaces; finish paint coating for the specific surface <br /> and service condition; and other special requirements. The <br /> total painting system (surface treatment, primer, finish coat <br /> and other necessary applications) and minimum dry mil <br /> thickness per coat required to achieve the specified finish for <br /> the specific surface and service condition shall be in strict <br /> compliance with the paint manufacturer's recommendations. <br /> For convenience of description and as a standard for a quality <br /> comparative reference, the "Paint Schedule" indicates the <br /> finish coating by name, number, or both, for products <br /> manufactured by Tnemec Company, Inc. or an approved <br /> equal, for the subject manufacturer, and approved equal <br /> products are acceptable. <br /> In addition to the data contained herein, painting for water <br /> storage tanks shall comply with AWWA Standard <br /> Specifications D102-97, or latest revision, "Coatings for Steel <br /> Water Storage Tanks." <br /> 16-12 <br /> I �3.Q.13. <br />