Laserfiche WebLink
Q� Ardaman & Associates, Inc. 460 NW Concourse Place,Unit 1 <br /> Port St.Lucie,Florida 34986 <br /> Geotechnical, Environmental and 772-878-0072(office) <br /> Materials Consultants 772-878-0097(fax) <br /> www.ardaman.com <br /> EXHIBIT "A" <br /> ARDAMAN &ASSOCIATES, INC. <br /> FEE SCHEDULE <br /> INDIAN RIVER COUNTY <br /> GEOTECHNICAL AND ENVIRONMENTAL ENGINEERING <br /> AND CONSTRUCTION MATERIALS TESTING SERVICES <br /> (Effective 9/23/2016 through 9/22/2018) <br /> COMPACTION TESTS <br /> In-Place Density Testing(ASTM D-6983 or D-2937,minimum 4 tests/trip) $22.00/test <br /> Standard(ASTM D-698)or Modified Proctor(ASTM D-1557) $90 00/test <br /> Limerock Bearing Ratio(minimum 3 points) $285 00/test <br /> CONCRETE SAMPLING AND TESTING <br /> Cylinder samples(up to 4 cylinders per set) molding <br /> curing,and strength testing(ASTM C-31 and C-39) <br /> Cylinders shall be left in a place provided by the <br /> Contractor,covered with plastic caps and attempts <br /> made to provide shade thereon. If temperature of <br /> the air is critical to first 24 hours(during field curing), <br /> equipment to maintain such controls shall be provided <br /> by others. $85.00/set <br /> Additional cylinders $15 00/cylinder <br /> Engineering technician standby time and transporting cylinders from site to office hourly tech rate <br /> Curing and strength testing samples delivered to our laboratory(ASTM C-39) $15.00/cylinder <br /> Slump tests(ASTM C-143) $15.00/test <br /> Air Entrainment(ASTM C-173) $30.00/test <br /> Unit weight $35.00/test <br /> Grout Prisms 3/set(blocks supplied by others) $80 00/set <br /> Marsh Funnel Viscosity $85.00/test <br /> Swiss Hammer <br /> Mobilization of equipment $85.00/trip <br /> Technician time hourly tech rate <br /> Coring and testing of cored samples. <br /> Engineering technician time(two technicians may be required) hourly tech rate <br /> Mobilization of coring equipment(with power supplied) $150.00/trip <br /> Mobilization of coring equipment(without power supplied) $100.00/trip <br /> Trimming,capping and strength test(ASTM C-42) $45 00/core <br /> Depth Measurement $15 00/core <br /> ASPHALT: FIELD INSPECTION,SAMPLING AND LABORATORY TESTING <br /> Field sampling of asphalt. hourly tech rate <br /> Coring: <br /> Mobilization of coring equipment(with power supplied) $150 00/trip <br /> Mobilization of coring equipment(without power supplied) $100 00/trip <br /> Marshall Stability and Flow Test(Includes pill densities) $105 00/test <br /> Extraction and gradation tests(sampled hot) $135 00/test <br /> Extraction and gradation tests(sampled from pavement) $165 00/test <br /> Density tests. $25.00/test <br /> Depth measurements $15 00/test <br /> CLASSIFICATION TESTS <br /> Moisture Content(ASTM D-2216) $15.00/test <br /> Organic Content $30.00/test <br /> Unit Weight/Classification(Undisturbed Sample) $48.00/test <br /> Sieve Analysis(ASTM D-421, D-422) $65 00/test <br /> Percent Fines(ASTM D-1140) $35.00/test <br /> Hydrometer Analysis(ASTM D-422) $85.00/test <br /> 460 NW Concourse Place,Unit 1 Port St.Lucie,Florida 34986 772-878-0072(office) 772-878-0097(fax) Page 1 of 5 <br />