Laserfiche WebLink
01340 — Submittal of Shop Drawings <br /> i <br /> i <br /> M. Upon return of a submittal marked "Revise and Resubmit", make the <br /> corrections indicated and repeat the initial approval procedure. The "Not <br /> Approved" notation is used to indicate material or equipment that is not <br /> acceptable. Upon return of a submittal so marked, repeat the initial <br /> approval procedure utilizing acceptable material or equipment. I <br /> i <br /> N. Work requiring Shop Drawings shall not be performed without an <br /> ENGINEER "Approved" or "Approved as Noted" Shop Drawings. <br /> O. Submit Shop Drawings well in advance of the need for the material or <br /> equipment for construction and with ample allowance for the time required <br /> to make delivery of material or equipment after data covering such is <br /> approved. CONTRACTOR shall assume the risk for all materials or <br /> equipment which is fabricated or delivered prior to the approval of Shop <br /> Drawings. Materials or equipment requiring Shop Drawings which have <br /> not yet received approval by the ENGINEER shall not be installed on the <br /> project. Materials or equipment will not be included in periodic progress <br /> payments until approval thereof has been obtained in the specified <br /> manner. r <br /> P. ENGINEER will review and process all submittals promptly, but a <br /> reasonable time should be allowed for this, for the Shop Drawings being <br /> revised and resubmitted, and for time required to return the approved <br /> Shop Drawings to CONTRACTOR. <br /> Q. Furnish required submittals with complete information and accuracy in <br /> order to achieve required approval of an item within three submittals. All <br /> costs to ENGINEER involved with subsequent submittals of Shop <br /> Drawings, Samples or other items requiring approval, will be back-charged <br /> to CONTRACTOR in accordance with the General Conditions and the <br /> Supplementary Conditions. If the CONTRACTOR requests a substitution <br /> for a previously approved item, all of ENGINEER'S costs in the reviewing <br /> and approval of the substitution will be back-charged to CONTRACTOR <br /> unless the need for such substitution is beyond the control of <br /> CONTRACTOR. <br /> + + END OF SECTION + + <br /> 01340-Submittal of Shop Drawings <br /> 01340-6 <br /> F:\PublicWorks\ENGINEERING DIVISION PROJECTS\1049_Bth St Sidewalk Improvements(58th Ave to 21st Court)Wdmim\bid documents\LAP <br /> Documents\Master Contract Documents\01340-Submittal of Shop Drawings.doc <br />