Laserfiche WebLink
SECTION 01340 <br />SUBMITTAL OF SHOP DRAWINGS <br />E. All submittals shall bear the stamp of approval and signature of <br />CONTRACTOR as.evidence that they have been reviewed by <br />CONTRACTOR. Submittals without this stamp of approval will not be <br />reviewed by the ENGINEER and will be returned to CONTRACTOR. <br />F. Assign a number to each submittal starting with No. 1 and thence <br />numbered consecutively. Identify resubmittals by the original submittal <br />number followed by the suffix "A" for the first resubmittal, the suffix "B" for <br />the second resubmittal, etc. <br />G. Initially submit to ENGINEER a minimum of four (4) copies of all <br />submittals that are on 11 -inch by 17 -inch or smaller sheets (no less than 8 <br />1!2 -inch x 11 -inch).. <br />H. After ENGINEER completes his review, Shop Drawings will be marked <br />with one of the following notations: <br />1. Approved <br />2. Approved as Noted <br />3. Approved as Noted - Resubmit <br />4. Revise and Resubmit <br />5. Not Approved <br />I. If a submittal is acceptable, it will be marked "Approved" or "Approved as <br />Noted". Two (2) prints or copies of the submittal will be returned to <br />CONTRACTOR. <br />J. Upon return of a submittal marked "Approved" or "Approved as Noted",. <br />CONTRACTOR may order, ship or fabricate the materials included on the <br />submittal, provided it is in accordance with the corrections indicated. <br />K. If a Shop Drawing marked "Approved as Noted" has extensive corrections <br />or corrections affecting other drawings or Work, ENGINEER may require <br />that CONTRACTOR make the corrections indicated thereon and resubmit <br />the Shop Drawings for record purposes. Such drawings will have the <br />notation, "Approved as Noted - Resubmit. <br />L. If a submittal is unacceptable, three (3) copies will be returned to <br />CONTRACTOR with one of the following notations: <br />1. "Revise and Resubmit' <br />2. "Not Approved" <br />M. Upon return.of a. submittal marked "Revise and Resubmit", make the <br />corrections indicated and repeat the initial approval procedure. The "Not <br />Approved" notation is used to -indicate material or equipment that is not <br />acceptable. Upon return of a submittal so marked, repeat the initial <br />approval procedure utilizing acceptable material or equipment. <br />01340 - Submittal of Shop Drawings <br />01340-5 <br />F:1Public WorksTMINEERING DIVISION PROJECTS\1736 IRC Health Department Roof Replacement Project\1 Admin18ld Dooumentswaster <br />cuL...d1M1 nF ¢tinn [lrawinnc ASR - .. <br />