Laserfiche WebLink
ROOFING REPLACEMENT, RECOVER AND REPAIR PROJECT PAGE 3 <br />INDIAN RIVER COUNTY - JAIL COMPLEX SECTION 075620 <br />JANUARY 4, 2018 GUTTER WATERPROOFING <br />performance of the work. The installer shall record conference discussions to include <br />decisions and agreements reached (or disagreements), and furnish copies of recorded <br />discussions to each attending party. The main purpose of this meeting is to review <br />foreseeable methods and procedures related to waterproofing work. <br />1.08 REGULATORY REQUIREMENTS <br />A. ` All work shall be performed in a safe, professional manner, conforming to all <br />federal, state and local codes. <br />B. All waterproofing system components shall meet current VOC regulations .as <br />established by the State in which they are being installed; and stating total VOC content, <br />in grams. per litre, for all system components (i.e. primers, adhesives, coatings, etc.) <br />` 1.09 DELIVERY, STORAGE AND HANDLING <br />A. Deliver all waterproofing materials to the site in original containers, with factory <br />seals intact. <br />B. Store all pail goods in their original undamaged containers in a clean, dry location <br />within their specified temperature range. <br />C. Do not expose materials to moisture in any form before, during, or after delivery <br />to the site. Reject delivery of materials that show evidence of contact with moisture. - <br />D. Remove manufacturer supplied plastic covers from materials provided with such. <br />Use "breathable" type covers such as canvas tarpaulins to allow venting and protection <br />from weather and moisture. Cover and protect materials at the end of each work day. Do <br />not remove any protective tarpaulins until immediately before the material will be <br />installed. <br />E. . Materials shall be stored above 55°F (12.6°C) a minimum of 24 hours prior to <br />application. <br />1.10 PROJECT CONDITIONS <br />A. Weather <br />1. Proceed with waterproofing only when existing and forecasted weather <br />conditions permit. <br />2. Membrane application can proceed when precipitation is imminent. Sikalastic <br />RoofPro (Decothane) is capable of curing, in immersion, immediately after application. <br />Physical damage, in the form of pock marks, may occur if uncured Sikalastic RoofPro <br />(Decothane) is exposed to heavy rainfall, but is not considered a limiting factor in the <br />performance of the roofing membrane. <br />.3. Ambient temperatures should be above 32°F (0°C) when applying the system. <br />