2018-168A - Laserfiche WebLink

Home Browse Search

ject site is shown on Drawings and may or may not be identical with the description of the land on which Project is to be built. 1.03 INDUSTRY STANDARDS A. Applicability of Standards: Unless the Contract Documents include more stringent re- quirements, applicable construction industry standards have the same force and effect as if bound or copied directly into the Contract Documents to the extent referenced. Such standards are made a part of the Contract Documents by reference. B. Publication Dates: Comply with standards in effect as of date of the Contract Docu- ments, unless otherwise indicated.- C. ndicated: C. Conflicting Requirements: If compliance with two or more standards is specified and the standards establish different or conflicting requirements for minimum quantities or quali- ty levels, comply with the most stringent requirement. Refer uncertainties and require- ments that are different, but apparently equal, to Engineer for a decision before proceed- ing. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be the minimum provided or performed. The actual installation may comply exactly with the minimum quantity or quality specified, or it may exceed the minimum within reasonable limits. To comply with these require- ments, indicated numeric values are minimum or maximum, as appropriate, for the context of requirements. Refer uncertainties to Engineer for a decision before proceeding. D. Abbreviations and Acronyms for Standards and Regulations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the standards and regulations in the following list. Names, telephone numbers, and Web site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents. 1.04 ABBREVIATIONS AND ACRONYMS A. Industry Organizations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the fol- lowing list. Names, telephone numbers, and Web site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents. AA Aluminum Association, Inc. (The) www.aluminum.org Indian River County West WWTP Roof Replacement 01 42 00-2 References Accessibility Guidelines for Buildings and Facilities Available from Access Board www.access-board.gov CFR Code of Federal Regulations Available from Government Printing Office www.access.gpo.gov/nara/cfr FED -STD Federal Standard See FS FS Federal Specification Available from National Institute of Building Sciences www.nibs.or 1.04 ABBREVIATIONS AND ACRONYMS A. Industry Organizations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the fol- lowing list. Names, telephone numbers, and Web site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents. AA Aluminum Association, Inc. (The) www.aluminum.org Indian River County West WWTP Roof Replacement 01 42 00-2 References